Wakefield · England
Bath chip & crack repair in Walton, Wakefield
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Walton and across Wakefield. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust by the waste and overflow
- A hole punched through by something heavy
Bath repair in Walton without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s deep scratches in acrylic and rusty patches near the plughole, we can help, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Walton (WF2)
- Area hub
- Wakefield
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps early to stop staining and limescale
- If an acrylic bath flexes, have its feet adjusted
- Do not scrub with anything abrasive
- Get any new chip repaired before it rusts
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Walton, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Covering Walton
Walton is about 3 miles south-east of Wakefield, in Wakefield. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 101 towns and villages across Wakefield, from the larger towns to small villages. We work right across the region, from Walton to Leeds (12 miles away).
We cover every part of the WF2 postcode area. Jobs here include addresses on Priory Square, Shay Lane and Walton Locks. Neighbouring places we cover include Agbrigg (1 mile north-west), Horse Race End (2 miles north), Crofton (2 miles north-east), Wintersett (2 miles south-east) and Cold Hiendley (2 miles south-east). Further out, we also cover Wakefield (3 miles north-west), Castleford (7 miles north-east), Pontefract (7 miles north-east), Ossett (5 miles north-west), Normanton (4 miles north-east) and South Kirkby and Moorthorpe (7 miles south-east).
Near you in Walton
Typical jobs here are in homes near St Pauls, The New Inn and Walton Primary Academy and the streets around them. For rail, the closest station is Sandal & Agbrigg station, about 1.2 miles north-west of the centre. Nearby you’ll also find Sandal Castle (1.4 miles north-west) and The Ridings Centre (2.7 miles north-west). Open spaces near Walton include Waterton Park.
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why book with us
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
See our full price list and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Walton. The price reflects:
- Unusual colours or finishes
- What kind of damage it is
- How much damage there is
- Whether old repairs or coatings need taking off
The price reflects the work involved, not where you live. The full price is agreed before booking.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Something in shot to show the size
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
FAQs for Walton
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Wakefield.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
More services for Walton
When we’d advise against a repair
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Cracks in acrylic we cannot reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Signs you need bath repair in Walton
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
Common reasons people in Walton contact us are:
- A chipped rim or side
- Holes from dropped items
- A kit repair that didn’t last
- Chips under the taps
Comparing quotes
- What aftercare is recommended
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
