Cambridgeshire · England
Bath Repair for Wardy Hill homes
Our repair technicians come to Wardy Hill for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Chips caused by builders
Bath repair in Wardy Hill, done in place
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Our repair technicians work on acrylic, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are a hole punched through by something heavy and a chipped rim or side.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Where
- Wardy Hill (CB6)
- Area hub
- Cambridgeshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
A repair is not right for every job, including:
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- Store metal items away from the bath
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How many areas need work
- The colour and finish to match
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed price
You can take the photos on your phone. Just ensure we can see:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A wider photo showing the entire bath
To get a price, send a couple of photos using our quote form or call us. We’ll say right away whether it can be repaired.
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to two to three hours for most chips, including clearing up.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Related advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Questions from Wardy Hill
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
How long before I can use the bath?
Typically the following day. We confirm the time before we leave.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Covering Wardy Hill
Wardy Hill is about 5 miles west of Ely, in Cambridgeshire. Our repair technicians come to clients in Wardy Hill and the surrounding area, so you don’t need to take anything anywhere. Wardy Hill is one of 371 towns and villages in Cambridgeshire where we work. Our nearest city page is London, about 64 miles away.
Jobs in CB6 work the same way as everywhere else we cover. From Jerusalem Drove and Hale Fen Lane or a nearby road, we can come to you. Nearby, we also work in Coveney (1 mile east), Way Head (1 mile north-east), Mepal (2 miles south-west), Oxlode (3 miles north-east) and Horseway (4 miles north-west). Further out, we also cover Cambridge (15 miles south), Huntingdon (15 miles west), St Ives (11 miles south-west), Ely (5 miles east), March (10 miles north) and Whittlesey (15 miles north-west).
Landmarks near Wardy Hill
Typical jobs here are in homes near Coveney Methodist Church. The closest station to Wardy Hill is Ely station, roughly 4.9 miles south-east. A little further out are Princess of Wales Hospital (4.9 miles east) and Ely Castle (4.7 miles east). Not far away are Chettisham Meadow.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Also in Wardy Hill
Common problems we fix in Wardy Hill
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
Most people get in touch after spotting something like this:
- Impact holes in acrylic
- Chips under the taps
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
What your quote should include
- Aftercare advice
- What happens if the damage is worse than the photos show
- How long it needs to cure
- Who will actually do the work
About our accreditations · Every repair comes with a one-year guarantee.
