Wolverhampton · England
Bath Repair in Warstones
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Warstones. Send pictures for a free, fixed quote.
- Repairs from £95
- A chip where the taps sit
- A chipped rim or side
What affects the price in Warstones
Repairs from £95. There’s no area surcharge for Warstones. What changes the price is:
- The material
- Previous DIY repairs that have to come out
- Access to the area
- Whether it’s a chip, crack, burn or wear
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Most quotes are done from photos alone. To make it quick:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
About our bath repair in Warstones
Most of our bath repairs take a few hours, and the bath is back in use the next day. You won’t need a plumber or tiler, because the bath doesn’t move. If you’re dealing with rust by the waste and overflow and a chip where the taps sit, we can help, whatever the material.
Every job is backed for twelve months in Warstones and everywhere else. We return to put right any problem with the work.
- Location
- Warstones (WV4, WV3)
- Region
- Wolverhampton
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Warstones
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
Most people get in touch when they notice something like this:
- A cracked acrylic bath
- A chip where the taps sit
- Rust spots around the plughole
- An old repair that has yellowed or come loose
What to look for in a quote
- When it can be used again
- Who will actually do the work
- How to care for the finish
- How the colour is matched
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- Acrylic cracks with no access behind them
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Keep metal cans and razors off the surface
- If an acrylic bath flexes, have its feet adjusted
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Warstones questions
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
How long before I can use the bath?
Normally by the following day, depending on the repair.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.
Can you repair a hole in a bath?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Should you replace it?
Swapping a damaged bath for a new one usually means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
What you get with us
- Most jobs done in one visit
- No need to remove anything
- A year’s guarantee on all work
- Straight answers about what a repair can do
Read our pricing and resurfacing vs replacement cost guide.
Towns and villages near Warstones
Other services in Warstones
Covering Warstones
Warstones is about 2 miles south-west of Wolverhampton, in Wolverhampton. We visit customers in Warstones, so nothing has to leave your home. Warstones is one of 96 towns and villages in Wolverhampton we cover. Our jobs stretch from Warstones to Birmingham (13 miles away).
Jobs in WV4 and WV3 are booked in the same way as anywhere else. Local streets include Wells Road, Hazel Road and Oakley Road, all of which we cover. Close by, we cover Merry Hill (1 mile north-west), Penn (1 mile south-east), Bradmore (1 mile north-east), Castlecroft (1 mile north-west) and Finchfield (1 mile north). Larger places within reach include Bilston (4 miles east), Coseley (4 miles south-east), Wednesfield (4 miles north-east), New Invention (6 miles north-east), Gornal (4 miles south-east) and Perton (3 miles north-west).
Near you in Warstones
Locally, our jobs take us to homes close to Royal Wolverhampton School, Highfields Science Specialist School and St Joseph, among other places. Also close by are Bantock House Museum (1 mile north-east), The Gunmakers Arms (0.7 miles north-east) and Warstones Primary School (under half a mile north-east). For rail, the closest station is Wolverhampton station, about 2.4 miles north-east of the centre. Well-known places in the area include Wolverhampton and Midland Counties Eye Infirmary (1.6 miles north-east) and Mander Centre (2.1 miles north-east). For a walk, there’s Peascroft Wood and Beacon Hill.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for a few hours, depending on the damage. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Let us know if it has been repaired before
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
