Cumbria · England
Bath Repair for Warwick-on-Eden homes
Problem with your bath in Warwick-on-Eden? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
How we handle bath repair in Warwick-on-Eden
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Our repair technicians work on whirlpool & spa baths, cast iron enamel and acrylic, and people most often call us about a chipped rim or side and damage beneath the taps.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Warwick-on-Eden (CA4)
- County
- Cumbria
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. There’s no area surcharge for Warwick-on-Eden. The price reflects:
- Whether we combine several jobs
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- Any details about the material
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Repair or replace in Warwick-on-Eden?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
- We leave the room as we found it
Read our full price list or bath cost comparison.
Questions from Warwick-on-Eden
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
When can I have a bath again?
Generally within a day, though it depends on what we’ve done.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Cumbria.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Signs you need bath repair in Warwick-on-Eden
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
You may need us if you’ve spotted any of these:
- A hole punched through by something heavy
- A chipped rim or side
- Damage beneath the taps
- Snagging damage from a refit
Before you book anyone
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- Aftercare advice
- Who will actually do the work
Places near Warwick-on-Eden
What else we do in Warwick-on-Eden
Covering Warwick-on-Eden
Warwick-on-Eden is about 4 miles east of Carlisle, in Cumbria. From the centre of Warwick-on-Eden to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 438 towns and villages in Cumbria. You can also see our page for Newcastle upon Tyne, about 48 miles away.
Our visits in CA4 work the same way as everywhere else we cover. From Grahams Croft and Buffs Croft or a nearby road, a technician can come to you. Neighbouring places we cover include Warwick Bridge (1 mile north-east), Aglionby (1 mile west), Crosby-on-Eden (2 miles north-west), Linstock (3 miles north-west) and Walby (3 miles north-west). We also work in nearby towns such as Carlisle (4 miles west), Currock (4 miles west), Raffles (5 miles west), Botcherby (4 miles south-west), Morton (5 miles west) and Wigton (14 miles west).
Landmarks near Warwick-on-Eden
Locally, our jobs take us to homes close to Church of St Leonard and Warwick Bridge Primary School and the streets around them. The closest station to Warwick-on-Eden is Wetheral station, about 1.2 miles south of the centre. Well-known places in the area include Garlands Hospital (2.6 miles south-west) and Corby Castle (1.5 miles south).
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the day after, the bath is ready to use.
Before we arrive
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Ensure the room can be ventilated
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
