Somerset · England
Bath chip & crack repair in Washford, Somerset
Bath repair across Washford and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- Damage beneath the taps
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave razors or cans standing in the bath
- Don’t leave a fresh chip for long
- Ensure an acrylic bath is firm underfoot
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Bath repair at your home in Washford
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include snagging damage from a refit and rust spots around the plughole, in whirlpool & spa baths, acrylic and roll-top & freestanding.
Every repair comes with a one-year guarantee.
- Location
- Washford (TA23)
- Region
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When we’d advise against a repair
Some jobs are not right for a repair, for example:
- Acrylic cracks with no access behind them
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
What affects the price in Washford
Repairs from £95. You will know the full cost before booking. We look at:
- Where the damage is and how we get to it
- What the surface is made of
- The type of damage
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Signs you need bath repair in Washford
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People normally call us after spotting something like this:
- Holes from dropped items
- Chips under the taps
- An old repair that has yellowed or come loose
- Chips caused by builders
Comparing quotes
- What protection goes down before work starts
- Who turns up on the day
- What preparation is included
- Whether there are any call-out or travel charges
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Also near Washford
Other services in Washford
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Colour mixed on the day to match
See our pricing and resurfacing vs replacement cost guide.
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Advice
Where we work around Washford
Washford is about 6 miles south-east of Minehead, in Somerset. Our repair technicians come to customers in Washford and the surrounding area, so you don’t need to take anything anywhere. Our technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Here we cover the TA23 postcode area. That includes homes on Station Road, Monksway and Castle Mead. If you’re just outside Washford, we cover Torre (1 mile south), Old Cleeve (1 mile north-west), Bilbrook (1 mile west), Chapel Cleeve (1 mile north-west) and Roadwater (1 mile south-west). Within a short drive, we also cover Taunton (15 miles south-east), Minehead (6 miles north-west), Wellington (14 miles south-east), Wilton (15 miles south-east), Comeytrowe (15 miles south-east) and Wiveliscombe (9 miles south).
Near you in Washford
Typical jobs here are in homes near The Washford Inn, St Mary's Church and Old Cleeve CofE School. A little further out are Dunster Castle (3.7 miles west) and Somerset And Dorset Railway Trust Museum (within half a mile west). For a walk, there’s Castle Hill.
FAQs for Washford
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
About our accreditations · Every repair comes with a one-year guarantee.
