North Lanarkshire · Scotland

Bath chip & crack repair in Waterloo, North Lanarkshire

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Waterloo and across North Lanarkshire. Free, fixed quotes from your photos.

  • Repairs from £95
  • A chipped rim or side
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Waterloo

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

Bath repair in Waterloo, done in place

A typical bath repair is a few hours’ work, and you can generally bathe again the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. We work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and common reasons people get in touch are cracks in an acrylic bath and a chipped rim or side.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Waterloo (ML2, ML8)
Area hub
North Lanarkshire
Warranty
12 months on all our work
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

What bath repair costs

Repairs from £95. We charge the same across the UK, including Waterloo. The price reflects:

  • How much damage there is
  • How easy the damage is to reach
  • What kind of damage it is
  • Unusual colours or finishes

Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

Photographing the damage takes a minute. Please include:

  • Whether it’s been repaired or coated before
  • Any details about the material
  • Daylight if possible, and no flash reflection
  • One picture of the entire bath

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Covering Waterloo

Waterloo is about 2 miles south of Wishaw, in North Lanarkshire. Wherever you are in the ML2 postcode area, we carry out the work at your property. We cover all 89 towns and villages in North Lanarkshire. We work right across the region, from Waterloo to Glasgow (about 16 miles away).

Jobs in ML2 and ML8 are booked in the same way as anywhere else. Jobs here include addresses on Gill Road, Trows Road and Main Street and the roads around them. Waterloo sits on or near the A71, so getting to you is simple. Other places close to Waterloo include Overtown (1 mile north), Gowkthrapple (1 mile north-west), Dalserf (1 mile south), Dimsdale (1 mile north) and Pather (1 mile north-west). We also work in nearby towns such as Motherwell (4 miles north-west), Cumbernauld (14 miles north), Coatbridge (9 miles north-west), Airdrie (8 miles north), Bellshill (6 miles north-west) and Burnfoot (9 miles north).

Near you in Waterloo

Locally, our jobs take us to homes close to Overtown Parish Church and St Aidan's High School, among other places. The nearest railway station is Wishaw station, about 1.7 miles north of the centre. Nearby you’ll also find University Hospital Wishaw (2.1 miles north-west) and Mauldslie Castle (1.3 miles south). Open spaces near Waterloo include Baron's Haugh RSPB Reserve and Allanton House lake.

Map of Waterloo © OpenStreetMap contributors

Landlord and trade work in Waterloo

Landlords, letting agents and housing providers in Waterloo use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes two to three hours for most chips. Before we leave, we explain the curing time and the aftercare.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area
  • Plan for the room to be out of bounds to pets and children

Getting a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.

Send photos for a quote

Read more

When to call us in Waterloo

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

You may need us if you’ve spotted:

  • Snagging damage from a refit
  • Impact holes in acrylic
  • Chips under the taps
  • A kit repair that didn’t last

Comparing quotes

  • How long it needs to cure
  • How long the guarantee is and what it covers
  • Who will actually do the work
  • If travel is included in the price

Our hiring checklist

When we would advise against a repair

A repair isn’t right for every job, for example:

  • Wear across the whole surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we cannot reach from underneath

If in doubt, send pictures and we will say what we think.

Materials we work on in Waterloo

  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel

Repair or replace: which is better?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • No need to remove anything
  • Usually one visit, start to finish
  • Technicians who travel to you, UK-wide
  • Colour mixed on the day to match

Take a look at our prices page or bath cost comparison.

Waterloo: your questions answered

What happens after I send photos?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

Will the repair last?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

What does bath repair cost?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.

What areas do you cover?

Everywhere in the UK, Waterloo included. Travel is included in the price.

Do you work in Waterloo?

Yes, we do. Technicians travel to Waterloo from across the region, with no extra charge for travel.

Will there be a smell?

Expect a mild smell while we’re working, which fades afterwards.

How to look after the repair

Nothing complicated is needed, just a few sensible habits:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Give the bath a quick rinse after use
  • A dripping tap stains enamel, so fix it early
  • Clean with warm water and a mild detergent

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.