Shropshire · England
Bath Repair in Wattlesborough Heath
We travel to Wattlesborough Heath for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Deep scratches in acrylic
Signs you need bath repair in Wattlesborough Heath
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Most people get in touch when they notice one of these:
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- Impact holes in acrylic
- Chips on the rim or sides
Questions to ask before you book
- Whether the price covers travel
- What protection goes down before work starts
- A fixed price, and whether VAT is included
- How long the guarantee is and what it covers
Bath repair at your home in Wattlesborough Heath
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the day after. We work on acrylic, pressed steel enamel and cast iron enamel, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and rust by the waste and overflow.
Big or small, you get the same one-year guarantee.
- Location
- Wattlesborough Heath (SY5)
- Region
- Shropshire
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
- Do not leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Places near Wattlesborough Heath
More services for Wattlesborough Heath
Common questions in Wattlesborough Heath
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. You’re under no obligation.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What we can’t put right
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
- Leaking fittings, which need a plumber
If in doubt, send pictures and we will say what we think.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Where we work around Wattlesborough Heath
Wattlesborough Heath is about 9 miles west of Shrewsbury, in Shropshire. Clients in Wattlesborough Heath get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Wattlesborough Heath is one of 433 places in Shropshire we cover. We work right across the region, from Wattlesborough Heath to Birmingham (47 miles away).
Postcode districts we cover here: SY5. We also cover the places around Wattlesborough Heath: Marche (1 mile west), Westbury (1 mile south), Asterley (3 miles south-east), Westley (3 miles south) and Horsebridge (4 miles south). We also work in nearby towns such as Shrewsbury (9 miles east), Oswestry (12 miles north), Coleham (9 miles east), Kingsland (8 miles east), Belle Vue (9 miles east) and Monkmoor (10 miles east).
Local landmarks in Wattlesborough Heath
Our clients here include homes close to Halfway House and St Margaret and the streets around them. Nearby you’ll also find Wattlesborough Castle (0.7 miles north). Open spaces near Wattlesborough Heath include Kempster's Hill.
What affects the price in Wattlesborough Heath
Prices start from £95. Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- The material
- Doing more than one item at once
We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Most quotes are done from photos alone. To make it quick:
- Daylight if possible, and no flash reflection
- The material, if you know it
- Your postcode, so we can check dates
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What happens on the day
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Open a window if you can
- Make sure the area is dry
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Landlord and trade work in Wattlesborough Heath
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams in Shropshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
