Swansea · Wales
Bath Repair in Waun-gron
Problem with your bath in Waun-gron? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Damage beneath the taps
- Chips on the rim or sides
About our bath repair in Waun-gron
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. If you’re dealing with chips caused by builders and a kit repair that didn’t last, we can help, on acrylic, roll-top & freestanding and whirlpool & spa baths alike.
Every repair comes with a one-year guarantee, wherever you are in Swansea.
- Where
- Waun-gron (SA5, SA6, SA1)
- Area hub
- Swansea
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Waun-gron
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly.
Materials we work on in Waun-gron
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Do you need bath repair in Waun-gron?
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a picture:
- Rusty patches near the plughole
- Impact holes in acrylic
- Deep scratches in acrylic
- A failed DIY repair that is discoloured or lifting
Before you book anyone
- How to care for the finish
- How changes to the job are handled
- Whether a trained technician does the job
- What preparation is included
Repair or replace in Waun-gron?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- We come to you, anywhere in the UK
- Fixed prices from your photos
- Colour mixed on the day to match
- Rooms protected and left tidy
See our pricing or bath cost comparison.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a morning or an afternoon. Before we go, we’ll explain when it can be used and how to look after it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
How to prepare
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Related advice
Waun-gron and the surrounding area
Waun-gron is about 1 mile north of Swansea, in Swansea. Whether you’re in the middle of Waun-gron or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 153 towns and villages in Swansea.
Every address in SA5, SA6 and SA1 is covered, from the main roads to the quietest streets. Streets in the area include Miles Road, Lloyd Road and Tudor Road, and we cover them all. Nearby, we also work in Treboeth (1 mile north), Lisbon (1 mile south-west), Tirdeunaw (1 mile north), Penfilia (1 mile south) and Trewyddfa (1 mile north-east). Further out, we also cover Gorseinon (4 miles west), Llwchwr (4 miles west), Mumbles (5 miles south-west), Norton (6 miles south-west), Tycoch (3 miles south-west) and Clydach (4 miles north-east).
Local landmarks in Waun-gron
Typical jobs here are in homes near Gwyrosydd Primary, Cwm Level Park and Kings Head Hotel. Other local landmarks include Bishop Vaughan R.C. School (0.8 miles north-east) and Siloh Welsh Congregational Chapel (0.6 miles south-east). The closest station to Waun-gron is Swansea station, about 1.8 miles south of the centre. Nearby you will also find Quadrant Shopping Centre (2.3 miles south) and The Tramshed (2.3 miles south). Open spaces near Waun-gron include Cnap-llwyd and Pluck Lake.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
- Do not leave a fresh chip for long
- Put a towel in the bath if you are working above it
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
FAQs for Waun-gron
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
More services for Waun-gron
About our accreditations · Every repair comes with a one-year guarantee.
