Swansea · Wales
Bath chip & crack repair in Norton, Swansea
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Norton, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Scuffs and scratches in the surface
Keeping it looking good
Once the work has cured, treat it gently:
- Do not leave razors or cans standing in the bath
- Make sure an acrylic bath is firm underfoot
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Bath repair in Norton, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Whether it’s a cracked acrylic bath and a kit repair that didn’t last, we can usually put it right.
Whatever the size of the job, you get the same one-year guarantee in Norton and across Swansea.
- Area
- Norton (SA3)
- Area hub
- Swansea
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- Unusual colours or finishes
- The material
- Whether old repairs or coatings need taking off
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- A photo taken from further back
- Where you are, by postcode
- Details of any past repairs
- Any details about the material
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Places near Norton
What else we do in Norton
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Norton
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Norton and nearby
Norton is about 4 miles south-west of Swansea, in Swansea. Anywhere in SA3, a technician comes to you. Norton is one of 153 places in Swansea where we work.
Jobs in SA3 work the same way as everywhere else we cover. From Glen Road, Slade Road and Newton Road or anywhere nearby, a technician can come to you. We also cover the places around Norton: West Cross (1 mile east), Oystermouth (1 mile south), Mumbles (1 mile north-east), Newton (1 mile south-west) and Mayals (1 mile north). Larger places within reach include Swansea (4 miles north-east), Castle (4 miles north-east), Morriston (7 miles north-east), Mount Pleasant (4 miles north-east), Gorseinon (6 miles north) and Dyfaty (4 miles north-east).
Around Norton
Typical jobs here are in homes near Beaufort Arms, Bishopston Comprehensive School and St David's Catholic Primary School, among other places. The closest station to Norton is Swansea station, roughly 4.3 miles north-east. Other landmarks nearby include Oystermouth Castle (0.5 miles south-east) and Singleton Hospital (2.2 miles north-east). The countryside around Norton includes Colts Hill and Bishop's Wood.
Questions from Norton
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
For landlords and businesses
For anyone letting property in or around Norton, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. On site, it takes two to three hours for most chips for most jobs. The room is left tidy and you’ll know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can generally use the bath the following day.
How to prepare
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
Get a quote
For a price in Norton, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
- No extra charge for your area
- Fixed prices from your photos
See our pricing or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
