Staffordshire · England
Bath Repair for Weaverslake homes
Bath repair for Weaverslake, without a refit. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- A chip where the taps sit
- Damage done while the bathroom was being fitted
The process
We work cleanly and quietly. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Read more
About our bath repair in Weaverslake
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We’re frequently asked to fix rust spots around the plughole and damage done while the bathroom was being fitted, across cast iron enamel, roll-top & freestanding and pressed steel enamel.
All our work comes with a one-year guarantee, wherever you are in Staffordshire.
- Area
- Weaverslake (DE13)
- County
- Staffordshire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Weaverslake
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Weaverslake questions
Something went through my bath. Can it be fixed?
Generally. Send us a picture of the hole and one from under the bath if you can.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you cover Weaverslake?
Yes, we do. Repair technicians travel to Weaverslake from across the region, with no extra charge for travel.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
How long does the repair take to cure?
Generally within a day, though it depends on what we have done.
Honest limits
We’ll always be straight with you, so here’s what a repair cannot fix:
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Weaverslake
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
How to care for the repair
Looking after the surface is easy:
- Fix dripping taps early to stop staining and limescale
- Make sure an acrylic bath is firm underfoot
- Give the bath a quick rinse after use
- Do not scrub with anything abrasive
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Nearby places to Weaverslake
More services for Weaverslake
What affects the price in Weaverslake
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- Previous DIY repairs that have to come out
- The colour and finish to match
- Where the damage is and how we get to it
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Phone photos are fine, there’s no need for anything special. Ensure they show:
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Where you are, by postcode
- A wider photo showing the entire bath
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Signs you need bath repair in Weaverslake
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
The things customers normally mention when they call include:
- Chips under the taps
- A cracked acrylic bath
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
What to look for in a quote
- How soon you can use it again
- How the colour is matched
- How long the guarantee is and what it covers
- How changes to the job are handled
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Covering Weaverslake
Weaverslake is about 6 miles east of Rugeley, in Staffordshire. Clients in Weaverslake get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Our repair technicians cover all 512 towns and villages in Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 21 miles away.
Our visits in DE13 are booked in the same way as anywhere else. From Hadley Street and Weaverlake Drive or a nearby road, a technician can come to you. We also travel to Yoxall (1 mile south-east), Woodlane (1 mile north), Barton Gate (2 miles east), Dunstall (3 miles east) and Barton-under-Needwood (3 miles east). Further out, we also cover Stafford (14 miles west), Burton upon Trent (7 miles east), Tamworth (11 miles south-east), Cannock (10 miles south-west), Lichfield (6 miles south) and Rugeley (6 miles west).
Near you in Weaverslake
Typical jobs here are in homes near Church of St Peter and Yoxall St Peter's CofE (VC) Primary School and the streets around them. A little further out are Barton Under Needwood Cottage Hospital (3.1 miles east). Green spaces nearby include Brankley Pastures.
About our accreditations · Every repair comes with a one-year guarantee.
