Leeds · England
Bath Repair for Weetwood homes
We travel to Weetwood for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Impact holes in acrylic
About our bath repair in Weetwood
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. If you are dealing with chips along the edge of the bath and a kit repair that didn’t last, we can usually put it right, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Weetwood (LS16, LS6)
- Region
- Leeds
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath repair in Weetwood
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Rusty patches near the plughole
- Chips under the taps
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
What your quote should include
- Who will actually do the work
- Aftercare advice
- What prep work is covered
- How your room will be protected
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Aftercare tips
Nothing complicated is needed:
- Keep metal cans and razors off the surface
- Have new chips seen to early
- Cover the bath during DIY or decorating
- Keep abrasive pads and gritty cleaners away from the bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Our work in Weetwood
Weetwood is about 2 miles east of Horsforth, in Leeds. We visit customers in Weetwood, so you do not need to take anything anywhere. We work in 198 places across Leeds.
Our technicians cover all of the LS16 and LS6 postcode area and the streets around it. We regularly work on streets such as Spen Road, Otley Road and Weetwood Road and the roads around them. Neighbouring places we cover include West Park (1 mile south-west), Adel (1 mile north), Far Headingley (1 mile south), Meanwood (1 mile south-east) and Headingley (1 mile south). Further out, we also cover Leeds (3 miles south-east), Morley (6 miles south), Pudsey (4 miles south-west), Rothwell (8 miles south-east), Beeston (5 miles south) and Farsley (4 miles south-west).
Local landmarks in Weetwood
Around Weetwood, we work in homes near Stables Pub, Moor Grange County Secondary School and The Hollies, among other places. Also close by are St Chad's Church (0.8 miles south), Lawnswood School (less than half a mile south-west) and St Chad's Church of England Primary School (0.6 miles south-west). Weetwood’s nearest station is Headingley station, about 1.5 miles south. Other landmarks nearby include Merrion Centre (3.1 miles south-east) and Chapel Allerton Hospital (2.6 miles south-east). For a walk, there is Rodley Nature Reserve and Rawdon Billing.
What affects the price in Weetwood
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- What kind of damage it is
- Any earlier repairs that need removing first
- The material and finish
- How much damage there is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
You can normally get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Where you are, by postcode
If you’re in Weetwood and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Questions from Weetwood
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How much does bath repair cost in Weetwood?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
How long before I can use the bath?
Normally by the following day, depending on the repair.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
The process
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the next day.
How to prepare
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Advice
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Towns and villages near Weetwood
What else we do in Weetwood
About our accreditations · Every repair comes with a one-year guarantee.
