Lancashire · England
Bath chip & crack repair in Weir, Lancashire
Fixed-price bath repair in Weir and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Chips caused by builders
About our bath repair in Weir
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and people most often call us about snagging damage from a refit and hairline or through cracks in acrylic.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Location
- Weir (OL13)
- Area hub
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Weir?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Prices start from £95. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Typically one visit, start to finish
- We leave the room as we found it
- Every repair guaranteed for a year
- No extra charge for your area
Read our pricing and resurfacing vs replacement cost guide.
Your questions about bath repair in Weir
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
Getting a price
Most customers in Weir get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Landlords, agents and businesses in Weir
If you manage property in Weir, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Landlords, letting agents and housing providers in Weir use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What affects the price in Weir
Prices start from £95. We charge the same across the UK, including Weir. The price reflects:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- The material
- Doing more than one item at once
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- One sharp close-up of the damage
- The material, if you know it
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Looking after it afterwards
How the surface is treated afterwards matters:
- Clean with warm water and a mild detergent
- Check that an acrylic bath doesn’t move when you stand in it
- Get a dripping tap fixed promptly
- Store metal items away from the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Covering Weir
Weir is about 2 miles north of Bacup, in Lancashire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover 482 places in Lancashire. You can also see our page for Manchester, about 17 miles away.
Postcode districts we cover here: OL13. You’ll find streets such as Kateholm, Deerplay Court and Scar End Close, all of which we cover. If you’re just outside Weir, we cover Sharneyford (1 mile south-east), Portsmouth (2 miles east), Cornholme (2 miles east), Pudsey (2 miles east) and Clough Foot (3 miles south-east). We also work in nearby towns such as Burnley (5 miles north-west), Accrington (7 miles west), Nelson (8 miles north), Rawtenstall (4 miles south-west), Colne (9 miles north) and Clitheroe (13 miles north-west).
What’s near Weir
Around Weir, we work in homes near Northern Primary School. For rail, the closest station is Todmorden station, roughly 4 miles east of the centre. Other landmarks nearby include Dobroyd Castle (3.8 miles east) and Bacup Natural History Society And Museum (1.5 miles south). Open spaces near Weir include Towneley Castle Hill and Rowley Lake.
Places near Weir
Also in Weir
When to call us in Weir
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal lets water in, and rust follows.
The things clients usually mention when they call include:
- A failed DIY repair that’s discoloured or lifting
- A hole punched through by something heavy
- Rust spots around the plughole
- Snagging damage from a refit
What to look for in a quote
- Who will actually do the work
- What the guarantee covers, and for how long
- Whether the colour is mixed to match
- What protection goes down before work starts
What a repair can’t fix
It helps to know what we can’t do:
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Weir
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
