Shropshire · England
Bath chip & crack repair in West Felton, Shropshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in West Felton, with a one-year guarantee on every repair.
- Repairs from £95
- Chips under the taps
- Rust by the waste and overflow
What affects the price in West Felton
Prices start from £95. We do not charge extra for travel to West Felton. The price comes down to:
- Access to the area
- The size and number of damaged areas
- The material
- The colour and finish to match
A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- The material, if you know it
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
How we handle bath repair in West Felton
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s rusty patches near the plughole and a kit repair that didn’t last, we can help.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- West Felton (SY11)
- Region
- Shropshire
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
Before you book, it’s worth knowing the limits:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Also near West Felton
Other services in West Felton
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No extra charge for your area
- Honest advice, even when it means no job
- We leave the room as we found it
- Most jobs done in one visit
Read our prices page or guide to resurfacing and replacement costs.
About West Felton
West Felton is about 4 miles south-east of Oswestry, in Shropshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. West Felton is one of 433 places in Shropshire we cover. Our jobs stretch from West Felton to Liverpool (about 40 miles away).
We work across the SY11 postcode area. Whether you live on Stone House Drive, Hicksons Lane and Holyhead Road or anywhere nearby, we can come to you. Other places close to West Felton include Twyford (1 mile north), Grimpo (1 mile north-east), Rednal (2 miles north-east), Babbinswood (3 miles north) and Welsh Frankton (5 miles north). We also work in nearby towns such as Shrewsbury (12 miles south-east), Oswestry (4 miles north-west), Coleham (12 miles south-east), Kingsland (12 miles south-east), Belle Vue (13 miles south-east) and Monkmoor (12 miles south-east).
Local landmarks in West Felton
In West Felton, that means homes near Church of St Michael, The Punch Bowl pub and West Felton CofE Primary School. A little further out are Wootton Castle (1.6 miles north) and Halston Hall (3.8 miles north).
Keeping it looking good
It’s all simple stuff:
- Store metal items away from the bath
- Check that an acrylic bath doesn’t move when you stand in it
- Give the bath a quick rinse after use
- Have new chips seen to early
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Questions from West Felton
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Can a cracked acrylic bath be fixed?
Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we will ask for another angle.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Related advice
When to call us in West Felton
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
These are the problems we are asked about most:
- Snagging damage from a refit
- A kit repair that didn’t last
- A chip where the taps sit
- A cracked acrylic bath
Comparing quotes
- If travel is included in the price
- How soon you can use it again
- Aftercare advice
- How your room will be protected
About our accreditations · Every repair comes with a one-year guarantee.
