Gloucestershire · England
Bath Repair in Westbury-on-Severn
Bath repair across Westbury-on-Severn and nearby, typically in one visit and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- Snagging damage from a refit
FAQs for Westbury-on-Severn
Is a holed acrylic bath repairable?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
When can I have a bath again?
Generally within a day, depending on the repair.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How do I get a price for bath repair in Westbury-on-Severn?
Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Bath repair in Westbury-on-Severn, done in place
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We’re often asked to fix holes from dropped items and chips on the rim or sides, on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Westbury-on-Severn (GL14)
- County
- Gloucestershire
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Westbury-on-Severn
What else we do in Westbury-on-Severn
Aftercare tips
How the surface is treated afterwards matters:
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Ensure an acrylic bath is firm underfoot
- Don’t scrub with anything abrasive
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Do you need bath repair in Westbury-on-Severn?
Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for any of the following:
- Impact holes in acrylic
- Damage beneath the taps
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
Comparing quotes
- How the colour is matched
- What preparation is included
- Who turns up on the day
- When it can be used again
How it works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the following day, the bath is ready to use.
Preparing for the visit
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Landlords, agents and businesses in Westbury-on-Severn
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
If you manage property in Westbury-on-Severn, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
Repairing versus replacing in Westbury-on-Severn
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
Take a look at our pricing and bath cost comparison.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Prices and what affects them
Prices start from £95. You will know the full cost before you book. We look at:
- The colour and finish to match
- The size and number of damaged areas
- Doing more than one item at once
- How easy the damage is to reach
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- Any details about the material
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Westbury-on-Severn
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Where we work around Westbury-on-Severn
Westbury-on-Severn is about 6 miles west of Quedgeley, in Gloucestershire. Jobs in Westbury-on-Severn are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Our repair technicians cover all 470 towns and villages in Gloucestershire. Our nearest city page is Birmingham, about 50 miles away.
Postcode districts we cover here: GL14. Streets in the area include High Street and Colchester Close. We also cover the places around Westbury-on-Severn: Elton (1 mile west), Northwood Green (1 mile north), Pope's Hill (2 miles west), Blaisdon (2 miles north) and Newnham (2 miles south-west). Further out, we also cover Cheltenham (15 miles east), Gloucester (8 miles east), Stroud (10 miles south-east), St Paul's (15 miles east), Lansdown (15 miles east) and Brockworth (11 miles east).
What’s near Westbury-on-Severn
Our clients here include homes close to Westbury-on-Severn Church of England Primary School and Church of St Peter and St Paul. A little further out are Bledisloe Tump (4.3 miles south-west) and Dilke Memorial Hospital (4.6 miles west). For a walk, there’s May Hill and Highnam Woods.
About our accreditations · Every repair comes with a one-year guarantee.
