Aberdeenshire · Scotland
Bath chip & crack repair in Westhill, Aberdeenshire
Fixed-price bath repair in Westhill and the surrounding area, usually in one visit and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- Chips on the rim or sides
About our bath repair in Westhill
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. Typical jobs include holes from dropped items and rust by the waste and overflow, in whirlpool & spa baths, acrylic and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Westhill (AB32)
- County
- Aberdeenshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Westhill
Can pets and children be at home?
Keep pets and children away from the work area on the day.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
How much does bath repair cost in Westhill?
Repairs from £95. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
How long does the repair take to cure?
Most baths can be used the day after. We confirm the time before we leave.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How we price bath repair
Repairs from £95. You’ll know the full cost before booking. We look at:
- How much damage there is
- What the surface is made of
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
We charge the same wherever you are, so there is no premium for Westhill. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- Where you are, by postcode
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Landlord and trade work in Westhill
If you manage property in Westhill, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Westhill and nearby
Westhill is about 6 miles west of Aberdeen, in Aberdeenshire. Across the AB32 area, we carry out the work at your property. We cover all 161 towns and villages across Aberdeenshire, from the larger towns to small villages.
Postcode districts we cover here: AB32. Jobs here include addresses on Leslie Crescent, Westwood Grove and Leddach Gardens and the roads around them. Westhill is on the A944, so it’s easy for us to reach. If you are just outside Westhill, we cover Elrick (1 mile south), Kingswells (3 miles east), Countesswells (3 miles south-east), Newhills (4 miles north-east) and Milltimber (4 miles south-east). We also work in nearby towns such as Inverurie (10 miles north), Stonehaven (13 miles south), Banchory (10 miles south-west), Garioch (9 miles north), Kemnay (8 miles north-west) and Kintore (6 miles north). Westhill is one of the larger places we cover in Aberdeenshire.
Landmarks near Westhill
In Westhill, that means homes near Westhill Academy. Nearby you will also find Drum Castle (4.5 miles south-west) and Garlogie Powerhouse Museum (2.4 miles south-west). For a walk, there is Loch of Skene and Brimmond Hill.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What happens on the day
You do not need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we are there.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Advice
When to call us in Westhill
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
You may need us if you’ve spotted:
- A chip where the taps sit
- Scuffs and scratches in the surface
- A failed DIY repair that’s discoloured or lifting
- A cracked acrylic bath
Comparing quotes
- How soon you can use it again
- What protection goes down before work starts
- A fixed quote, and whether VAT is included
- Whether the price covers travel
When a repair isn’t the answer
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Rinse the bath after use, especially in hard water areas
- Store metal items away from the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Put a towel in the bath if you are working above it
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Also near Westhill
More services for Westhill
About our accreditations · Every repair comes with a one-year guarantee.
