Suffolk · England
Bath chip & crack repair in Westhorpe, Suffolk
Problem with your bath in Westhorpe? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Snagging damage from a refit
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
- Check that an acrylic bath doesn’t move when you stand in it
- Fix dripping taps early to stop staining and limescale
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Bath repair at your home in Westhorpe
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. If you’re dealing with chips under the taps and scratches you can feel with a fingernail, we can generally put it right.
You get a one-year guarantee, the same in Westhorpe as everywhere else we work.
- Where
- Westhorpe (IP14)
- County
- Suffolk
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Westhorpe
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath worn all over, where resurfacing makes more sense
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Westhorpe questions
How long before I can use the bath?
Normally within a day, though it depends on what we’ve done.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Do you need bath repair in Westhorpe?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Clients normally contact us about:
- An old repair that has yellowed or come loose
- Hairline or through cracks in acrylic
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
Questions to ask before booking
- Whether the price is fixed and includes VAT
- How soon you can use it again
- Whether they match the colour on site
- If travel is included in the price
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
About Westhorpe
Westhorpe is about 6 miles north of Stowmarket, in Suffolk. Jobs in Westhorpe are booked in like any other job: a fixed price from your photos, then a visit to do the work. We work in 731 places in Suffolk. We work right across the region, from Westhorpe to London (71 miles away).
Every address in IP14 is within our area, from the main roads to the quietest streets. Streets in the area include Church Road and The Street. Nearby, we also work in Wyverstone (1 mile south), Bacton Green (2 miles south), Badwell Green (2 miles west), Long Thurlow (2 miles west) and Four Ashes (3 miles west). Within a short drive, we also cover Bury St Edmunds (12 miles west), Stowmarket (6 miles south), Diss (8 miles north-east), Needham Market (9 miles south), Chilton (6 miles south) and Thurston (8 miles west).
What’s near Westhorpe
Around Westhorpe, we work in homes near Church of St Margaret, among other places. The closest station to Westhorpe is Elmswell station, roughly 4.7 miles south-west. Further afield, we also cover the area around Finningham Cromwells Plantation (1.3 miles north) and The Mechanical Music Museum & Bygones (1.6 miles south-east). Open spaces near Westhorpe include Mellis Common.
Towns and villages near Westhorpe
Also in Westhorpe
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, including clearing up.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know which floor the room is on
- Let us know if it has been repaired before
- Make sure the room can be ventilated
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
How we price bath repair
Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:
- The type of damage
- How hard the colour is to match
- Whether we combine several jobs
- What the surface is made of
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send pictures for a quote
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- A picture taken from further back
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
