Suffolk · England
Bath Repair in Wyverstone
Problem with your bath in Wyverstone? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- A chipped rim or side
Bath repair in Wyverstone without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can typically use the bath the next day. Our repair technicians work on acrylic, whirlpool & spa baths and cast iron enamel, and people most frequently call us about a chipped rim or side and chips under the taps.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Wyverstone (IP14)
- Area hub
- Suffolk
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. Allow two to three hours for most chips, and we’ll tell you if anything changes.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Related advice
Wyverstone questions
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
What areas do you cover?
We cover the entire UK, including Wyverstone and the rest of Suffolk. Send your postcode with your photos and we will confirm dates.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
How do I get a price for bath repair in Wyverstone?
Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Suffolk.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Places near Wyverstone
More services for Wyverstone
About Wyverstone
Wyverstone is about 6 miles north of Stowmarket, in Suffolk. Whether you are in the middle of Wyverstone or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Wyverstone is one of 731 towns and villages in Suffolk where we work. You can also see our page for London, about 71 miles away.
We cover every part of IP14 and the streets around it. Other places close to Wyverstone include Westhorpe (1 mile north), Bacton Green (1 mile south), Long Thurlow (2 miles west), Badwell Green (2 miles north-west) and Haughley Green (2 miles south-west). Further out, we also cover Bury St Edmunds (12 miles west), Stowmarket (6 miles south), Diss (9 miles north-east), Needham Market (8 miles south), Westbourne (15 miles south-east) and Chilton (5 miles south).
Local landmarks in Wyverstone
Our customers here include homes close to Bacton Primary School, The Plough pub and Church of St George, among other places. The nearest railway station is Elmswell station, about 4 miles south-west of the centre. Well-known places in the area include The Mechanical Music Museum & Bygones (1.4 miles east) and Finningham Cromwells Plantation (2.2 miles north). Open spaces near Wyverstone include Norton Wood.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
What affects the price in Wyverstone
Repairs from £95. We give every job a fixed price from pictures. These are the things that affect it:
- What the surface is made of
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Before you send pictures, a few simple things make all the difference:
- Any details about the material
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
For a price in Wyverstone, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Flexing caused by a failed cradle or loose feet
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we will tell you honestly before you book.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
- Rinse it down after each bath
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why Wyverstone customers choose us
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Work done at your home or business
Read our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
