Wiltshire · England
Bath chip & crack repair in Westwood, Wiltshire
Our technicians come to Westwood for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- Scuffs and scratches in the surface
Honest limits
Honesty matters more than a booking, so here’s what a repair will not do:
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Westwood
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
About our bath repair in Westwood
Most of our bath repairs take a few hours, and you can usually bathe again the next day. You won’t need a plumber or tiler, because nothing is disconnected. Whether it’s rust spots around the plughole and scratches you can feel with a fingernail, we can generally put it right.
All our work is covered by a one-year guarantee, wherever you are in Wiltshire.
- Location
- Westwood (BA15)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Westwood
We are used to working with agents and managing companies. Send the address, pictures and access details.
For anyone letting property in or around Westwood, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Also near Westwood
Also in Westwood
How we price bath repair
Repairs from £95. We price every job individually, from your photos. The main factors are:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Previous DIY repairs that have to come out
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
The process
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, including clearing up.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Ask for a price
Most clients in Westwood get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Westwood and the surrounding area
Westwood is about 3 miles west of Trowbridge, in Wiltshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Westwood is one of 425 towns and villages in Wiltshire we cover. Our jobs stretch from Westwood to Birmingham (80 miles away).
Jobs in BA15 work the same way as everywhere else we cover. Jobs here include addresses on Boswell Road, Hebden Road and Tynings Way and the roads around them. Neighbouring places we cover include Avoncliff (1 mile north), Turleigh (1 mile north), Winsley (1 mile north), Bradford-on-Avon (2 miles north-east) and Wingfield (2 miles south-east). Larger places within reach include Trowbridge (3 miles east), Chippenham (11 miles north-east), Calne (14 miles north-east), Devizes (13 miles east), Westbury (6 miles south-east) and Melksham (7 miles north-east).
Near you in Westwood
Locally, our jobs take us to homes close to Westwood-with-Iford Primary School, Church of St Mary the Virgin and St Laurence School, among other places. For rail, the closest station is Avoncliff station, about 0.5 miles north. A little further out are Trowbridge Community Hospital (3 miles east) and Bradford Without (2.8 miles north-east).
Westwood: your questions answered
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you need bath repair in Westwood?
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
If you can see any of these, send us a photo:
- Chips caused by builders
- A cracked acrylic bath
- Rust spots around the plughole
- Chips along the edge of the bath
What to look for in a quote
- How the colour is matched
- Whether the price covers travel
- What happens if the damage is worse than the pictures show
- Aftercare advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Keeping it looking good
Once the work has cured, treat it gently:
- A dripping tap stains enamel, so fix it early
- Ensure an acrylic bath is firm underfoot
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
About our accreditations · Every repair comes with a one-year guarantee.
