North Yorkshire · England

Bath Repair for Wharram le Street homes

Bath repair across Wharram le Street and nearby, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • A chipped rim or side
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Wharram le Street

Bath repair in Wharram le Street without replacing anything

A typical bath repair is a few hours’ work, and you can usually bathe again the day after. You will not need a plumber or tiler, because nothing is disconnected. We regularly repair whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most frequently call us about chips along the edge of the bath and scratches you can feel with a fingernail.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Before and after: a chipped, rust-stained bath around the plughole
Where
Wharram le Street (YO17)
County
North Yorkshire
Guarantee
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Wharram le Street: your questions answered

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Will there be a smell?

There may be a mild smell during the work that clears as it cures.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you work in Wharram le Street?

Yes. We work across the UK and come to Wharram le Street and the rest of North Yorkshire. Send photos and we will quote, or call 0345 017 0787.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

How the visit works

We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Let us know if it has been repaired before
  • Mention if the room is upstairs or in a flat
  • Point us to the nearest place to park

Get a quote

If you are in Wharram le Street and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Related advice

When to call us in Wharram le Street

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

Typical reasons for a call-out include:

  • Cracks in an acrylic bath
  • Snagging damage from a refit
  • Deep scratches in acrylic
  • Chips on the rim or sides

What your quote should include

  • What prep work is covered
  • The length of the guarantee and what it covers
  • When it can be used again
  • Whether the price is fixed and includes VAT

10 questions to ask before booking

How we price bath repair

Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • Whether we combine several jobs

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

How to get a fixed price

We price nearly every job from photos. This is what we need:

  • What it’s made of, if you know
  • Something in shot to show the size
  • Any earlier repairs or coatings
  • A wider photo showing the whole bath

There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

When we’d advise against a repair

We would rather lose a job than do one that will not last, so these are the limits:

  • A bath worn all over, where resurfacing makes more sense
  • Metal that has corroded all the way through
  • Flexing caused by a failed cradle or loose feet

Not sure? Send pictures and we’ll give you a straight answer before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

For landlords and businesses

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Our work in Wharram le Street

Wharram le Street is about 11 miles north of Pocklington, in North Yorkshire. Anywhere in YO17, we come to you. Our repair technicians cover 626 places across North Yorkshire, from the larger towns to small villages. Our jobs stretch from Wharram le Street to Leeds (about 40 miles away).

Our technicians cover all of YO17 and the streets around it. Neighbouring places we cover include Duggleby (1 mile north-east), North Grimston (2 miles north-west), Birdsall (3 miles west), Kirby Grindalythe (3 miles north-east) and Settrington (4 miles north-west). Larger places within reach include Malton (6 miles north-west), Pickering (12 miles north), Norton-on-Derwent (5 miles north-west), Crossgates (15 miles north-east), Thornton-le-Dale (11 miles north) and Seamer (15 miles north-east).

What’s near Wharram le Street

Around Wharram le Street, we work in homes near Church of St Mary and the streets around them. A little further out are Mount Ferrant Castle (4.2 miles west) and The Computer Sheds (3.6 miles south-east).

Map of Wharram le Street © OpenStreetMap contributors

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Don’t leave a fresh chip for long
  • Avoid scourers, wire wool and gritty cream cleaners
  • Clean with warm water and a mild detergent
  • Don’t leave razors or cans standing in the bath

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.