Highland · Scotland
Bath Repair in Whiteface
Bath repair across Whiteface and nearby, normally in one visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Repairing versus replacing in Whiteface
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Colour mixed on the day to match
- We will tell you if it’s not worth repairing
- A year’s guarantee on all work
- No need to remove anything
See our pricing or resurfacing vs replacement cost guide.
Bath repair in Whiteface without replacing anything
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our repair technicians work on pressed steel enamel, roll-top & freestanding and acrylic, and people most often call us about cracks in an acrylic bath and rusty patches near the plughole.
Every repair comes with a one-year guarantee.
- Area
- Whiteface (IV25)
- County
- Highland
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
To keep it looking its best for years:
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath doesn’t move when you stand in it
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Questions from Whiteface
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Whiteface.
Nearby places to Whiteface
What else we do in Whiteface
Covering Whiteface
Whiteface is about 23 miles north-west of Nairn, in Highland. Jobs in Whiteface are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Whiteface is one of 253 places in Highland where we work.
Every address in IV25 is within our area, from the main roads to the quietest streets. Whiteface sits on or near the A949, so getting to you is simple. We also cover the places around Whiteface: Spinningdale (2 miles west), Edderton (3 miles south), Camore (4 miles east), Dornoch (5 miles east) and Hilton (6 miles east). We also work in nearby towns such as Tain (6 miles south-east), Alness (13 miles south), Invergordon (13 miles south), Golspie (10 miles north-east), Brora (15 miles north-east) and Cromarty (14 miles south). If you are somewhere remote, ring us first and we will plan the trip.
Local landmarks in Whiteface
Nearby you’ll also find Proncy Castle (4.3 miles north-east). Open spaces near Whiteface include Loch a' Ghiubhais and Struie Hill.
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes two to three hours for most chips.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Open a window if you can
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Where the damage is and how we get to it
- How many items we do on one visit
- How many areas need work
- Whether old repairs or coatings need taking off
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
You can take the pictures on your phone. Just make sure we can see:
- A close-up of the damage, in focus
- Something in shot to show the size
- A picture taken from further back
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you are under no obligation.
Honest limits
Before booking, it’s worth knowing the limits too:
- Cracks in acrylic we can’t reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we will tell you honestly.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
What we’re called out for in Whiteface
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Look out for these signs:
- A chip where the taps sit
- Snagging damage from a refit
- A chipped rim or side
- Hairline or through cracks in acrylic
Before you book anyone
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
- What protection goes down before work starts
For landlords and businesses
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
