Newport · Wales
Bath chip & crack repair in Whitson, Newport
Bath repair across Whitson and nearby, done in a single visit in most cases.
- Repairs from £95
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
Covering Whitson
Whitson is about 5 miles south-east of Newport, in Newport. Our technicians come to clients in Whitson and nearby villages, so there’s no workshop to go to. Whitson is one of 69 towns and villages in Newport where we work. Our jobs stretch from Whitson to Birmingham (77 miles away).
Jobs in NP18 are booked in the same way as anywhere else. You’ll find streets such as Hare's Lane and Porton Road, all of which we cover. If you are just outside Whitson, we cover Redwick (2 miles east), Bishton (2 miles north), Summerleaze (3 miles east), Magor (3 miles north-east) and Underwood (3 miles north). Larger places within reach include Newport (5 miles north-west), Victoria (5 miles north-west), Stow Hill (5 miles north-west), Maindee (5 miles north-west), Gold Tops (6 miles north-west) and Summer Hill (5 miles north-west).
Local landmarks in Whitson
In Whitson, that means homes near Whitson Church and the streets around them. Other landmarks nearby include Royal Gwent Hospital (5.2 miles north-west) and Trefesgob Castle (2.9 miles north). Green spaces nearby include Somerton and Waltwood Hill.
About our bath repair in Whitson
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can normally use the bath the day after. We’re frequently asked to fix chips caused by builders and deep scratches in acrylic, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Whitson (NP18)
- County
- Newport
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Rinse the bath after use, especially in hard water areas
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How we price bath repair
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- Where the damage is and how we get to it
- The size and number of damaged areas
- The material
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Where you are, by postcode
- A picture taken from further back
- Any details about the material
- A coin beside the damage so we can judge size
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Places near Whitson
Also in Whitson
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Cracks in acrylic we can’t reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we’ll say what we think.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes a few hours, and we will keep you posted as we go.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
How to get a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
Questions from Whitson
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Can a cracked acrylic bath be fixed?
Usually, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Work for landlords and builders
If you manage property in Whitson, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Common problems we fix in Whitson
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
It’s worth getting a quote if you see:
- Chips under the taps
- Impact holes in acrylic
- A cracked acrylic bath
- Rust spots around the plughole
Before you book anyone
- How your room will be protected
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
- Aftercare advice
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
