Cumbria · England
Bath chip & crack repair in Wilton, Cumbria
Fixed-price bath repair in Wilton and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chips on the rim or sides
- Damage beneath the taps
Bath repair at your home in Wilton
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our technicians work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and the jobs we see most are chips caused by builders and scratches you can feel with a fingernail.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Wilton (CA22)
- County
- Cumbria
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Wilton questions
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
How do I get a price for bath repair in Wilton?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What areas do you cover?
We cover the entire UK, including Wilton and the rest of Cumbria. Just include your postcode and we will offer you dates.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you work in Wilton?
Yes. We work across the UK and come to Wilton and the rest of Cumbria. Send photos and we will quote, or call 0345 017 0787.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
What happens once I’ve sent photos?
You’ll get a fixed quote back. There is no obligation to book.
More services for Wilton
Landlord and trade work in Wilton
For anyone letting property in or around Wilton, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Landlords, letting agents and housing providers in Wilton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
What we are called out for in Wilton
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Look out for any of the following:
- A chip where the taps sit
- Deep scratches in acrylic
- Rusty patches near the plughole
- Holes from dropped items
Before you book anyone
- How the colour is matched
- Whether there are any call-out or travel charges
- How changes to the job are handled
- Who turns up on the day
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Wilton. The price reflects:
- The material and finish
- Unusual colours or finishes
- How many areas need work
- Doing more than one item at once
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- Any details about the material
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
How to look after the repair
Once the work has cured, treat it gently:
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
- Clean with warm water and a mild detergent
- Rinse it down after each bath
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Wilton and nearby
Wilton is about 5 miles south-east of Whitehaven, in Cumbria. Clients in Wilton get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Wilton is one of 438 places in Cumbria we cover. Our jobs stretch from Wilton to Liverpool (about 78 miles away).
All of CA22 is covered. We also cover the places around Wilton: Haile (2 miles south), Egremont (2 miles west), Cleator (2 miles north-west), Orgill (2 miles west) and Thornhill (2 miles south-west). Within a short drive, we also cover Workington (11 miles north), Whitehaven (5 miles north-west), Cockermouth (13 miles north-east), Moorclose (10 miles north), Cleator Moor (3 miles north-west) and Bransty (6 miles north-west).
Local landmarks in Wilton
We visit homes around West Lakes Academy and the streets around them. The closest station to Wilton is Nethertown station, roughly 3.7 miles south-west. Nearby you will also find West Cumberland Hospital (4.3 miles north-west) and Abbey Flatts (2.4 miles south-east). Open spaces near Wilton include Ponsonby Tarn and Ponsonby Fell.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Honest limits
Before booking, it’s worth knowing the limits too:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
If in doubt, send pictures and we will say what we think.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes two to three hours for most chips for most jobs. We leave the room clean and ready to use once it has cured.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
How to get a price
Upload a photo of the damage and a wider shot of the entire item, with your CA22 postcode, and we’ll come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
