Dorset · England
Bath chip & crack repair in Winkton, Dorset
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Winkton. Send pictures for a free, fixed quote.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
Bath repair in Winkton, done in place
Most of our bath repairs take a few hours, and you can usually bathe again the day after. There is no need to book a plumber or tiler, because nothing is disconnected. We work on cast iron enamel, pressed steel enamel and acrylic, and the jobs we see most are a cracked acrylic bath and scuffs and scratches in the surface.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Winkton (BH23)
- County
- Dorset
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Nothing complicated is needed:
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
- Rinse it down after each bath
- Avoid scourers, wire wool and gritty cream cleaners
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Landlord and trade work in Winkton
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About Winkton
Winkton is about 2 miles north-west of Christchurch, in Dorset. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We cover 462 places across Dorset.
Our visits in BH23 work the same way as everywhere else we cover. Streets in the area include Homefield Close, Admiral Place and Redwood Drive, and we cover them all. Neighbouring places we cover include Sopley (1 mile north), Burton (1 mile south), South Bockhampton (1 mile east), North Bockhampton (1 mile north-east) and Middle Bockhampton (1 mile north-east). Larger places within reach include Wimborne Minster (9 miles west), Verwood (9 miles north-west), Ferndown (6 miles north-west), Broadstone (10 miles west), Corfe Mullen (11 miles west) and Swanage (14 miles south-west).
Near you in Winkton
Our customers here include homes close to The Grange School, Homefield School and Church of St Michael and All Angels, among other places. The closest station to Winkton is Christchurch station, about 1.8 miles south of the centre. Further afield, we also cover the area around Christchurch (2.1 miles south) and Christchurch Hospital (1.6 miles south-west). Not far away are St Catherine's Hill.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
When we would advise against a repair
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Leaking fittings, which need a plumber
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
What bath repair costs
Prices start from £95. We don’t charge extra for travel to Winkton. The price comes down to:
- The type of damage
- Whether we combine several jobs
- The material
- How much damage there is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- What it’s made of, if you know
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
What we’re called out for in Winkton
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Customers usually contact us about:
- Rust spots around the plughole
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
- A chip where the taps sit
Comparing quotes
- The length of the guarantee and what it covers
- How the room is protected while they work
- What prep work is covered
- When it can be used again
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Related advice
Places near Winkton
More services for Winkton
FAQs for Winkton
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What about rust by the waste?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Repair or replace: which is better?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Winkton
- Technicians who travel to you, UK-wide
- Fixed prices from your pictures
- No need to remove anything
- A year’s guarantee on all work
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
