Norfolk · England

Bath Repair for Woodbastwick homes

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Woodbastwick. Send photos for a free, fixed quote.

  • Repairs from £95
  • Chips under the taps
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Woodbastwick?

How we handle bath repair in Woodbastwick

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Whether it’s scuffs and scratches in the surface and damage done while the bathroom was being fitted, we can help, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Before and after: a damaged acrylic bath corner repaired in place
Area
Woodbastwick (NR13)
County
Norfolk
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Keeping it looking good

It’s all simple stuff:

  • If an acrylic bath flexes, have its feet adjusted
  • Rinse it down after each bath
  • Get any new chip repaired before it rusts
  • Don’t leave razors or cans standing in the bath

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

Common problems we fix in Woodbastwick

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

It’s worth getting a quote if you see:

  • Damage beneath the taps
  • Rusty patches near the plughole
  • Cracks in an acrylic bath
  • Scuffs and scratches in the surface

Questions to ask before you book

  • How long it needs to cure
  • Who will actually do the work
  • Whether the colour is mixed to match
  • How changes to the job are handled

10 questions to ask before booking

What your bath is made of matters

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

What affects the price in Woodbastwick

Prices start from £95. Every quote is fixed and free. What we take into account:

  • How hard the colour is to match
  • Whether we combine several jobs
  • How easy the damage is to reach
  • Any earlier repairs that need removing first

Our prices are the same across the UK, so there is no premium for Woodbastwick. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your pictures

Two or three clear pictures are generally enough. It helps if you send:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • A wider photo showing the whole bath
  • One sharp close-up of the damage

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

When we would advise against a repair

Some jobs are not right for a repair, including:

  • A bath that moves underfoot, until its support is fixed
  • A bath worn all over, where resurfacing makes more sense
  • A steel bath rusted through

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic

Our work in Woodbastwick

Woodbastwick is about 7 miles north-east of Norwich, in Norfolk. Across the NR13 area, a technician comes to you. We cover 797 places in Norfolk.

All of NR13 is within our area, from the main roads to the quietest streets. You’ll find streets such as Horning Road, Southfield Lane and Salhouse Road, all of which we cover. We also travel to Salhouse (2 miles west), Ranworth (2 miles east), Pedham (2 miles south), Panxworth (2 miles south-east) and South Walsham (2 miles south-east). Larger places within reach include Norwich (7 miles south-west), Great Yarmouth (13 miles south-east), Gorleston-on-Sea (14 miles south-east), Sprowston (6 miles west), Thorpe St Andrew (6 miles south-west) and North Walsham (10 miles north).

What’s near Woodbastwick

Around Woodbastwick, we work in homes near South Walsham Fen and Church of St Fabian and St Sebastian. The closest station to Woodbastwick is Salhouse station, roughly 2.4 miles west of the centre. A little further out are St Andrew's Hospital (5.2 miles south-west). For a walk, there’s Salhouse Broad and Ranworth Broad.

Map of Woodbastwick © OpenStreetMap contributors

Work for landlords and builders

For anyone letting property in or around Woodbastwick, we will quote for several properties at once. Just send pictures for each address and we will price them together.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can usually use the bath the following day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access
  • Tell us if there are stairs or a lift

Ask for a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.

Get a fixed quote

Related advice

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Woodbastwick questions

How long does the repair take to cure?

Generally within a day, though it depends on what we have done.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos can’t show what we need.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

What does bath repair cost?

Repairs from £95. We give a fixed price from your photos. Send a close-up and a picture of the whole item with your NR13 postcode.

Will the price change on the day?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

What about rust by the waste?

Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.