Norfolk · England
Bath chip & crack repair in Salhouse, Norfolk
We travel to Salhouse for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- A failed DIY repair that’s discoloured or lifting
Bath repair in Salhouse without replacing anything
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on whirlpool & spa baths, pressed steel enamel and cast iron enamel, and common reasons people get in touch are an old repair that has yellowed or come loose and damage beneath the taps.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Salhouse (NR13)
- Region
- Norfolk
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Prices and what affects them
Repairs from £95. Prices are worked out job by job, from your pictures. The main factors are:
- The type of damage
- Doing more than one item at once
- What the surface is made of
- How much damage there is
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- A clear, close picture of the problem area
- Any details about the material
- Details of any past repairs
- Natural light rather than flash
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Repair or replace in Salhouse?
Many people think a damaged bath means a new one. Generally it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why book with us
- Repair technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Colour-matched on site
Read our full price list or bath cost comparison.
FAQs for Salhouse
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
What areas do you cover?
Everywhere in the UK, Salhouse included. Travel is included in the price.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
How to care for the repair
Most damage we see is avoidable. A few tips:
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
- Have new chips seen to early
- Cover the bath during DIY or decorating
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Do you need bath repair in Salhouse?
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Customers usually contact us about:
- Cracks in an acrylic bath
- A hole punched through by something heavy
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
What to look for in a quote
- How to care for the finish
- What happens if they find more damage
- What the guarantee covers, and for how long
- How your room will be protected
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Where we work around Salhouse
Salhouse is about 6 miles north-east of Norwich, in Norfolk. We travel to homes and businesses in Salhouse and nearby villages, so there is no workshop to go to. Our technicians cover all 797 towns and villages across Norfolk.
Every address in NR13 is covered. You’ll find streets such as Station Road, Topcliffe Avenue and Otter Close, and we cover them all. You’ll find Salhouse on the B1140, so it’s easy for us to reach. We also cover the places around Salhouse: Woodbastwick (2 miles east), Little Plumstead (2 miles south), Pedham (2 miles south-east), Blofield Heath (2 miles south-east) and Great Plumstead (3 miles south). We also work in nearby towns such as Norwich (6 miles south-west), Great Yarmouth (14 miles east), Wymondham (14 miles south-west), Gorleston-on-Sea (15 miles south-east), Sprowston (4 miles west) and Thorpe St Andrew (4 miles south-west).
Near you in Salhouse
Around Salhouse, we work in homes near Salhouse Voluntary Controlled Primary School and Church of All Saints, among other places. The closest station to Salhouse is Salhouse station, about 0.9 miles west. Well-known places in the area include St Andrew's Hospital (3.9 miles south-west) and Hautbois Castle (4.8 miles north-west). The countryside around Salhouse includes Salhouse Broad and Ranworth Broad.
The process
We agree an arrival time beforehand. Once we are there, the work takes a morning or an afternoon in most cases. The room is left tidy and you’ll know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
How to prepare
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Ask for a price
If you are in Salhouse and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Places near Salhouse
Also in Salhouse
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we will say what we think.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
