Stockport · England

Bath chip & crack repair in Woodford, Stockport

Problem with your bath in Woodford? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Woodford homes

Our work in Woodford

Woodford is about 2 miles south of Bramhall, in Stockport. Jobs in Woodford are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in 42 places in Stockport. You can also see our page for Manchester, about 10 miles away.

Our repair technicians cover all of the SK7 postcode area and the streets around it. We regularly work on streets such as Lancastrian Way, Ringway Avenue and Merlin Close. Close by, we cover Hope Green (1 mile east), Poynton (2 miles north-east), Adlington (2 miles south-east), Skellorn Green (2 miles east) and Bramhall (2 miles north). Within a short drive, we also cover Stockport (5 miles north), Cheadle Hulme (3 miles north-west), Burnage (6 miles north), Hazel Grove (3 miles north-east), Reddish (7 miles north) and Cheadle (4 miles north-west).

What’s near Woodford

In Woodford, that means homes near Lostock Hall Primary School, Christ Church and Bramhall High School, among other places. The nearest railway station is Poynton station, about 1.2 miles north-east of the centre. A little further out are Avro Heritage Museum (less than half a mile south-east) and Stepping Hill Hospital (3.3 miles north). Not far away are Lindow Common and Kerridge Hill.

Map of Woodford © OpenStreetMap contributors

Bath repair at your home in Woodford

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We regularly repair cast iron enamel, pressed steel enamel and acrylic, and people most frequently call us about an old repair that has yellowed or come loose and rust spots around the plughole.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Rusty chip next to a bath plughole, before and after repair
Location
Woodford (SK7)
Area hub
Stockport
Guarantee
One year on every repair
Quote
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026

What we’re called out for in Woodford

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Typical reasons for a call-out include:

  • Chips along the edge of the bath
  • Scuffs and scratches in the surface
  • A cracked acrylic bath
  • Rust spots around the plughole

What to look for in a quote

  • How soon you can use it again
  • Whether they match the colour on site
  • Whether there are any call-out or travel charges
  • Aftercare advice

How to compare quotes

What affects the price in Woodford

Prices start from £95. You won’t pay by the hour. The price is based on:

  • What kind of damage it is
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • Doing more than one item at once

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Send pictures for a quote

Two or three clear photos are usually enough. It helps if you send:

  • The postcode, so we can plan the visit
  • A coin beside the damage so we can judge size
  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before

For a price in Woodford, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

How to care for the repair

A little care keeps the finish looking good. Our advice:

  • Protect the bath with a towel when doing jobs nearby
  • Clean with warm water and a mild detergent
  • Give the bath a quick rinse after use
  • Get a dripping tap fixed promptly

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.

A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.

The process

The work is clean and fairly quiet. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Ensure the area is dry
  • Move bottles, mats and clutter away from the area

Getting a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed price

Read more

Repair or replace: which is better?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Woodford

  • Colours mixed by hand to suit your surface
  • Dust sheets down, tidy finish
  • Same prices wherever you are
  • Free fixed quotes from pictures

See our full price list and resurfacing vs replacement cost guide.

Materials and what they mean for the repair

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Questions from Woodford

How do I book?

Just photos, your postcode and a contact number. On the day, access to the room.

It’s been repaired before. Can you still fix it?

Usually, yes. The old repair comes out first.

Is a holed acrylic bath repairable?

Often, if there is access underneath. The hole is backed, filled and refinished to match.

What if the damage is worse than the pictures show?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including pastel and older colours.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

What a repair can’t fix

Before booking, it’s worth knowing the limits too:

  • Acrylic cracks with no access behind them
  • A bath worn all over, where resurfacing makes more sense
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.