Hampshire · England
Bath Repair for Woolmer homes
Problem with your bath in Woolmer? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Snagging damage from a refit
- Damage beneath the taps
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
How we handle bath repair in Woolmer
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Whether it’s a cracked acrylic bath and rust spots around the plughole, we can normally put it right, whatever the material.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Woolmer (GU33)
- Region
- Hampshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Woolmer
Landlords, letting agents and housing providers in Woolmer use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Also near Woolmer
More services for Woolmer
What we can’t put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly before you book.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Repair or replace: which is better?
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- We leave the room as we found it
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Colour mixed on the day to match
See our prices page and guide to resurfacing and replacement costs.
How to care for the repair
After the repair has cured, a few habits help it last:
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
How the visit works
Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Make sure the room can be ventilated
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Common problems we fix in Woolmer
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
You may need us if you’ve spotted:
- Scratches you can feel with a fingernail
- A chipped rim or side
- Damage beneath the taps
- Chips caused by builders
What to look for in a quote
- What prep work is covered
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
- Who will actually do the work
Woolmer: your questions answered
How do I get a price for bath repair in Woolmer?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Something went through my bath. Can it be fixed?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Which areas do you work in?
Across the UK, so Woolmer is covered. Prices do not change with location.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- How easy the damage is to reach
- Unusual colours or finishes
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Phone pictures are fine, there’s no need for anything special. Just make sure we can see:
- A coin or ruler next to the damage for scale
- One picture of the whole bath
- Details of any past repairs
- What it’s made of, if you know
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Woolmer and the surrounding area
Woolmer is about 2 miles south of Bordon, in Hampshire. We visit homes and businesses in Woolmer and the surrounding area, so nothing has to leave your home. Our technicians cover 683 places in Hampshire. Our jobs stretch from Woolmer to London (44 miles away).
We work across the GU33 postcode area and the streets around it. Whether you live on Benhams Lane and Petersfield Road or a nearby road, a technician can come to you. Other places close to Woolmer include Greatham (1 mile south), Blackmoor (1 mile north-west), Longmoor (1 mile south-east), Weavers Down (2 miles east) and Liss Forest (2 miles south). Larger places within reach include Farnborough (15 miles north), Fleet (13 miles north), Horndean (13 miles south-west), Aldershot (12 miles north-east), Alton (6 miles north-west) and Waterlooville (15 miles south-west).
Landmarks near Woolmer
Around Woolmer, we work in homes near Mill Chase Academy, St Matthew's Church and St Matthew's Church of England Aided Primary School, among other places. For rail, the closest station is Liss station, roughly 2.8 miles south. Well-known places in the area include Chase Community Hospital (1.7 miles north-east) and The Romany Museum (2.8 miles west). For a walk, there’s Deadwater Valley and Selborne Hill.
About our accreditations · Every repair comes with a one-year guarantee.
