Hampshire · England

Non-Slip Bath Coating in Woolmer

We travel to Woolmer for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Woolmer

How we handle non-slip bath coating in Woolmer

It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. If you’re dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can normally put it right, whatever the material.

Whatever the size of the job, it’s backed by a one-year guarantee in Woolmer and across Hampshire. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Woolmer (GU33)
County
Hampshire
Warranty
A year, on every repair
Quotes
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

What we cannot put right

A repair is not always the answer, and we’d rather say so up front. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Acrylic baths
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)

What we are called out for in Woolmer

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Customers usually contact us about:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • What happens if they find more damage
  • What the guarantee covers, and for how long
  • Aftercare advice
  • Who turns up on the day

10 questions to ask before you book

Why repair rather than replace?

The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

Why book with us

  • Straight answers about what a repair can do
  • Generally one visit, start to finish
  • One-year guarantee on every repair
  • Dust sheets down, tidy finish

Read our full price list.

Covering Woolmer

Woolmer is about 2 miles south of Bordon, in Hampshire. From the centre of Woolmer to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 683 places in Hampshire. Our jobs stretch from Woolmer to London (44 miles away).

All of GU33 is covered, from the main roads to the quietest streets. From Benhams Lane and Petersfield Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Greatham (1 mile south), Blackmoor (1 mile north-west), Longmoor (1 mile south-east), Weavers Down (2 miles east) and Liss Forest (2 miles south). Within a short drive, we also cover Farnborough (15 miles north), Fleet (13 miles north), Horndean (13 miles south-west), Aldershot (12 miles north-east), Alton (6 miles north-west) and Waterlooville (15 miles south-west).

Local landmarks in Woolmer

Typical jobs here are in homes near Mill Chase Academy, St Matthew's Church and St Matthew's Church of England Aided Primary School, among other places. Woolmer’s nearest station is Liss station, about 2.8 miles south. Well-known places in the area include Chase Community Hospital (1.7 miles north-east) and The Romany Museum (2.8 miles west). For a walk, there is Deadwater Valley and Selborne Hill.

Map of Woolmer © OpenStreetMap contributors

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Common questions in Woolmer

Can you redo someone else’s repair?

Usually, yes. The old repair comes out first.

Which areas do you work in?

We cover the entire UK, including Woolmer and the rest of Hampshire. Just include your postcode and we will offer you dates.

Do you work in Woolmer?

We do. Technicians travel to Woolmer from across the region, and the price is the same as everywhere else.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

What happens next?

We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Landlord and trade work in Woolmer

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Landlords, letting agents and housing providers in Woolmer use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

How we price non-slip bath coating

There’s no charge for travel to Woolmer. The price comes down to:

  • The material and finish
  • The colour and finish to match
  • How many items we do on one visit
  • Where the damage is and how we get to it

There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from photos

You can take the pictures on your phone. Just make sure we can see:

  • Where you are, by postcode
  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus
  • The material, if you know it

You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

What happens on the day

We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes a few hours for most jobs. The room is left tidy and ready to use once it has cured.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before
  • Let us know about parking or access

Get a quote

To get a price, send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.

Send photos for a quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.