Fife · Scotland
Bath Repair for Wormit homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Wormit and across Fife. Send photos for a free, fixed quote.
- Repairs from £95
- A chipped rim or side
- A hole punched through by something heavy
Bath repair in Wormit, done in place
A typical bath repair is a few hours’ work, and you can usually bathe again the following day. There is no need to book a plumber or tiler, because the bath doesn’t move. If you are dealing with rust by the waste and overflow and cracks in an acrylic bath, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Wormit (DD6)
- Region
- Fife
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Covering Wormit
Wormit is about 3 miles south of Blackness, in Fife. From the centre of Wormit to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Wormit is one of 133 towns and villages in Fife where we work. Our jobs stretch from Wormit to Edinburgh (about 34 miles away).
All of DD6 is covered. From Bay Road, Flass Road and Kilmany Road or anywhere nearby, we can come to you. If you’re just outside Wormit, we cover Newport-on-Tay (1 mile north-east), West End (2 miles north), Blackness (3 miles north), Pickletillum (3 miles east) and Drumoig (3 miles east). Within a short drive, we also cover St Andrews (9 miles south-east), Cupar (7 miles south), Tayport (4 miles north-east), Kennoway (15 miles south), Auchtermuchty (13 miles south-west) and Leuchars (5 miles south-east).
What’s near Wormit
Locally, our jobs take us to homes close to Harris Academy and the streets around them. Wormit’s nearest station is Dundee station, roughly 2.3 miles north. Further afield, we also cover the area around Naughton Castle (1.6 miles south-west) and Dundee Dental Hospital (2.5 miles north). Not far away are Trottick Mill Ponds and Balgay Hill.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
FAQs for Wormit
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you cover the entire of Fife?
The whole UK, including all of Fife. Just include your postcode and we will confirm dates.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Fife.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Do you cover Wormit?
Yes. We work across the UK and come to Wormit and the rest of Fife. Send photos and we’ll quote, or call 0345 017 0787.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
What we can’t put right
A repair is not right for every job, including:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in Wormit
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Common problems we fix in Wormit
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Customers generally contact us about:
- Damage beneath the taps
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
Questions to ask before booking
- What prep work is covered
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
- How soon you can use it again
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Also near Wormit
Other services in Wormit
What bath repair costs
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- Whether we combine several jobs
- How many areas need work
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
We charge the same wherever you are, so there’s no premium for Wormit. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Natural light rather than flash
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- What it’s made of, if you know
To get a price, send a couple of pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
Should you replace it?
Replacing a fitted bath usually means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Fixed prices from your photos
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
Read our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
