Fife · Scotland
Non-Slip Bath Coating in Wormit
Non-slip bath coating for Wormit, without a refit. Send us photos for a fixed quote, then book a visit.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
About our non-slip bath coating in Wormit
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. We work on shower trays, wet room floors (ask us) and enamelled baths, and people most frequently call us about safety for older or less mobile people and resurfaced baths that are now too smooth.
You get a one-year guarantee, the same in Wormit as everywhere else we work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Wormit (DD6)
- Region
- Fife
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. The price reflects the work involved, not where you live. You’ll see the full price before you book.
Why Wormit clients choose us
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- Free fixed quotes from pictures
Take a look at our pricing.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
FAQs for Wormit
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does non-slip bath coating cost in Wormit?
Every job gets a fixed quote from your pictures. Send a close-up and a picture of the whole item and your postcode.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Nearby places to Wormit
Other services in Wormit
When a repair is not the answer
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly.
Materials we work on in Wormit
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Acrylic baths
- Resurfaced baths
Do you need non-slip bath coating in Wormit?
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Keep an eye out for any of the following:
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
Comparing quotes
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
- What prep work is covered
What affects the price in Wormit
We charge the same across the UK, including Wormit. The price reflects:
- Where the damage is and how we get to it
- The colour and finish to match
- The material
- What kind of damage it is
We charge the same wherever you are, so there’s no premium for Wormit. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A photo taken from further back
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Landlord and trade work in Wormit
For anyone letting property in or around Wormit, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams in Fife and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How it works
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Mention any parking restrictions or tricky access
- Open a window if you can
- Tell us if there are stairs or a lift
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.
Related advice
Covering Wormit
Wormit is about 3 miles south of Blackness, in Fife. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Wormit is one of 133 towns and villages in Fife we cover. You can also see our page for Edinburgh, about 34 miles away.
Our technicians cover all of the DD6 postcode area and the streets around it. You will find streets such as Bay Road, Flass Road and Kilmany Road. Other places close to Wormit include Newport-on-Tay (1 mile north-east), West End (2 miles north), Blackness (3 miles north), Pickletillum (3 miles east) and Drumoig (3 miles east). Within a short drive, we also cover St Andrews (9 miles south-east), Cupar (7 miles south), Tayport (4 miles north-east), Kennoway (15 miles south), Auchtermuchty (13 miles south-west) and Leuchars (5 miles south-east).
Local landmarks in Wormit
Locally, our jobs take us to homes close to Harris Academy, among other places. The closest station to Wormit is Dundee station, roughly 2.3 miles north of the centre. Well-known places in the area include Naughton Castle (1.6 miles south-west) and Dundee Dental Hospital (2.5 miles north). For a walk, there is Trottick Mill Ponds and Balgay Hill.
About our accreditations · Every repair comes with a one-year guarantee.
