Somerset · England
Bath chip & crack repair in Yarley, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths in Yarley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips on the rim or sides
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Get any new chip repaired before it rusts
- A dripping tap stains enamel, so fix it early
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
Bath repair in Yarley without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. Whether it’s rusty patches near the plughole and chips caused by builders, we can help.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Yarley (BA5)
- County
- Somerset
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Yarley?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Yarley customers choose us
- No extra charge for your area
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- One-year guarantee on every repair
Take a look at our pricing and resurfacing vs replacement cost guide.
What we are called out for in Yarley
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
You may need us if you’ve spotted:
- Chips along the edge of the bath
- Chips under the taps
- Cracks in an acrylic bath
- Rusty patches near the plughole
Comparing quotes
- What preparation is included
- What protection goes down before work starts
- Whether the price covers travel
- Whether the price is fixed and includes VAT
Yarley and the surrounding area
Yarley is about 3 miles west of Wells, in Somerset. Whether you are in the middle of Yarley or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Yarley is one of 640 places in Somerset we cover.
Every address in BA5 is covered, from the main roads to the quietest streets. Local streets include Wells Road, Monksford Lane and Yarley Hill, all of which we cover. Nearby, we also work in Worth (1 mile east), Henton (1 mile west), Bleadney (1 mile west), Easton (2 miles north) and Panborough (2 miles west). Further out, we also cover Bridgwater (14 miles south-west), Burnham-on-Sea (12 miles west), Wells (3 miles east), Midsomer Norton (11 miles north-east), Shepton Mallet (7 miles east) and Street (6 miles south).
What’s near Yarley
In Yarley, that means homes near The Pheasant pub, Wookey Primary School and Christ Church and the streets around them. Further afield, we also cover the area around Cave Museum (2.4 miles north-east) and Mendip Hospital (4.3 miles east). For a walk, there is Ham Wall and Glastonbury Tor.
Landlords, agents and businesses in Yarley
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Questions from Yarley
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your pictures and you will get one combined price.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Nearby places to Yarley
More services for Yarley
Prices and what affects them
Repairs from £95. You will know the full cost before you book. We look at:
- Access to the area
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- One picture of the entire bath
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours, depending on the damage, tidy-up included.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Tell us if there are stairs or a lift
- Make sure the area is dry
- Clear toiletries, mats and anything else from around the area
Getting a price
To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
