Somerset · England
Bath chip & crack repair in Yarlington, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths in Yarlington, carried out at your home and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- A chip where the taps sit
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- We leave the room as we found it
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
Read our prices page and bath cost comparison.
About our bath repair in Yarlington
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Whether it’s chips along the edge of the bath and impact holes in acrylic, we can typically put it right, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Yarlington (BA9)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Yarlington and nearby
Yarlington is about 10 miles north-east of Yeovil, in Somerset. From the centre of Yarlington to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 640 places in Somerset.
Our visits in BA9 work the same way as everywhere else we cover. Whether you live on Crocker's Hill, Lodge Hill and West Street or anywhere nearby, a technician can come to you. We also travel to Bratton Seymour (1 mile east), Shepton Montague (2 miles north-east), Blackford (2 miles south), Holton (2 miles south-east) and Pitcombe (3 miles north-east). Further out, we also cover Yeovil (10 miles south-west), Frome (14 miles north-east), Wells (13 miles north-west), Midsomer Norton (15 miles north), Shepton Mallet (9 miles north) and Street (12 miles west).
What’s near Yarlington
In Yarlington, that means homes near Church of St Mary and Stags Head Inn and the streets around them. The closest station to Yarlington is Castle Cary station, about 3 miles north-west of the centre. Other landmarks nearby include Haynes Motor Museum (3.3 miles south-west). The countryside around Yarlington includes Lamyatt Beacon.
Looking after it afterwards
Looking after the surface is easy:
- If an acrylic bath flexes, have its feet adjusted
- Get a dripping tap fixed promptly
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
FAQs for Yarlington
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you cover the entire of Somerset?
The whole UK, including all of Somerset. Send your postcode with your photos and we will offer you dates.
Do you cover Yarlington?
We do. We send a technician to Yarlington for every job, and the price is the same as everywhere else.
How long before I can use the bath?
Most baths can be used the day after. We confirm the time before we leave.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the following day, the bath is ready to use.
How to prepare
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Getting a price
For a price in Yarlington, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
What affects the price in Yarlington
Repairs from £95. You will not pay by the hour. The price depends on:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- The material
- Where the damage is and how we get to it
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- What it’s made of, if you know
- Any earlier repairs or coatings
- A picture taken from further back
- The postcode, so we can plan the visit
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Honest limits
Some jobs aren’t right for a repair, for example:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
Also near Yarlington
Also in Yarlington
About our accreditations · Every repair comes with a one-year guarantee.
