Rhondda Cynon Taff · Wales
Bath chip & crack repair in Ynyswen, Rhondda Cynon Taff
Bath repair across Ynyswen and nearby, done in a single visit in most cases.
- Repairs from £95
- Rusty patches near the plughole
- Chips on the rim or sides
Bath repair in Ynyswen without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. We are frequently asked to fix a failed DIY repair that’s discoloured or lifting and holes from dropped items, in acrylic, cast iron enamel and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Ynyswen (CF42)
- Area hub
- Rhondda Cynon Taff
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
So the finish stays in good condition:
- Check that an acrylic bath does not move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Stick to mild cleaners and a soft cloth
- Protect the bath with a towel when doing jobs nearby
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Places near Ynyswen
Other services in Ynyswen
What a repair can’t fix
In fairness, some problems need a different fix:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- Leaking fittings, which need a plumber
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Landlord and trade work in Ynyswen
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Ynyswen: your questions answered
Do you come to Ynyswen?
Yes, we do. We send a technician to Ynyswen for every job, and the price is the same as everywhere else.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
How long before I can use the bath?
Most baths can be used the following day. We confirm the time before we leave.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Can you price it without visiting?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Ynyswen and the surrounding area
Ynyswen is about 2 miles north-west of Rhondda, in Rhondda Cynon Taff. Our technicians come to clients in Ynyswen and the surrounding area, so nothing has to leave your home. Ynyswen is one of 133 towns and villages in Rhondda Cynon Taff we cover.
Every address in CF42 is covered. From Ynyswen Road, Crown Avenue and Cemetery Road or anywhere nearby, we can come to you. With the A4061 close by, Ynyswen is easy for our technicians to reach. We also travel to Pen-yr-englyn (1 mile north-west), Treorchy (1 mile south-east), Cwmparc (1 mile south), Treherbert (1 mile north-west) and Tynewydd (1 mile west). Further out, we also cover Aberdare (4 miles north-east), Pontypridd (9 miles south-east), Mountain Ash (6 miles east), Tonypandy (4 miles south-east), Porth (6 miles south-east) and Church Village (11 miles south-east).
Landmarks near Ynyswen
Typical jobs here are in homes near Ysgol G.G. Ynyswen, Crown Hotel and St George's Church and the streets around them. There’s a railway station in Ynyswen itself: Ynyswen station. A little further out are Moel Garn (4.5 miles south-west) and Llwynypia Hospital (3.6 miles south-east). Open spaces near Ynyswen include Mynydd Tyle-coch and Ferndale Lake.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
What affects the price in Ynyswen
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- The material
- How many items we do on one visit
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- A wider photo showing the whole bath
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Should you replace it?
Swapping a damaged bath for a new one typically means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Why choose Surface Doctor in Ynyswen
- Fixed prices from your pictures
- Colour mixed on the day to match
- Honest advice, even when it means no job
- Nothing taken out or refitted
Read our prices page or guide to resurfacing and replacement costs.
What we do, step by step
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a morning or an afternoon for most jobs. We leave the room clean and you will know when it can be used.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Let the surface dry out before the visit
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
