Edinburgh · Scotland

Bath & shower resealing (mastic) in Abercorn, Edinburgh

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Abercorn and across Edinburgh. Send photos for a free, fixed quote.

  • Old sealant that looks dirty
  • Unsealed corners
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Abercorn

Bath resealing at your home in Abercorn

A proper reseal starts with removing every trace of the old silicone. New silicone will not bond to old, which is why many DIY jobs peel. Whether it’s old sealant that looks dirty and silicone smeared on tiles, we can normally put it right, whatever the material.

Big or small, you get the same one-year guarantee in Abercorn and across Edinburgh.

Location
Abercorn (EH30)
Region
Edinburgh
Warranty
One year on every repair
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Landlords, agents and businesses in Abercorn

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

When we would advise against a repair

We will always be straight with you, so here’s what a repair can’t fix:

  • Movement in the bath or tray
  • Hollow or loose tiles
  • Hidden water damage

If in doubt, send photos and we’ll say what we think.

Materials we work on in Abercorn

  • Baths
  • Wet rooms
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Basins & vanity units

What bath resealing costs

We don’t charge extra for travel to Abercorn. The price comes down to:

  • How hard the colour is to match
  • What the surface is made of
  • Doing more than one item at once
  • How easy the damage is to reach

We charge the same wherever you are, so there’s no premium for Abercorn. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from pictures

Good pictures mean an accurate price. Here’s what we find most useful:

  • Natural light rather than flash
  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale

Upload pictures of the damage and one of the entire item, and tell us you’re in Abercorn, and we will come back with a fixed quote.

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Keep bottles off the joints
  • Let steam out after showers
  • Run the extractor fan during and after showers
  • Keep the joints dry

Don’t scrape the sealant with anything sharp, and keep shampoo bottles off the joints.

Mouldy sealant is more than a cosmetic problem. Resealing early keeps water out of the walls and floor.

What happens on the day

You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a couple of hours, and you’re welcome to carry on with your day while we work.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, taps included.

Preparing for the visit

  • Let us know about parking or access
  • Make sure the room can be ventilated
  • Tell us if there are stairs or a lift

How to get a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.

Get a fixed quote

Read more

Abercorn: your questions answered

Why does my sealant keep going mouldy?

Damp is the cause. Ventilation and drying keep it clean longer.

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

How long does silicone take to cure?

We’ll give you the curing time, normally around a day.

Can you reseal over the old silicone?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

Common problems we fix in Abercorn

Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning only removes the surface.

You may need us if you’ve spotted:

  • Missing sealant behind the taps
  • Stained silicone
  • Silicone smeared on tiles
  • Black mould in the sealant

Comparing quotes

  • If travel is included in the price
  • Who turns up on the day
  • What protection goes down before work starts
  • What prep work is covered

Choosing a repair company

Different materials, different repairs

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Shower trays

We put weight on a tray before sealing it, so the joint is at its widest.

Where we work around Abercorn

Abercorn is about 3 miles west of Queensferry, in Edinburgh. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Abercorn is one of 175 towns and villages in Edinburgh we cover. Our jobs stretch from Abercorn to Edinburgh (about 11 miles away).

Jobs in EH30 are booked in the same way as anywhere else. If you are just outside Abercorn, we cover Newton (1 mile south-east), Woodend (1 mile south-east), Auldcathie (2 miles south), Winchburgh (2 miles south) and Kirkliston (4 miles south-east). Within a short drive, we also cover Edinburgh (11 miles east), Leith (12 miles east), Bonnington (12 miles east), Greenside (12 miles east), Broughton (11 miles east) and Bellevue (11 miles east).

Local landmarks in Abercorn

Our clients here include homes close to Abercorn Church and Winchburgh Academy. The nearest railway station is North Queensferry station, about 3.3 miles east of the centre. Further afield, we also cover the area around Hopetoun House (0.5 miles east) and Queensferry Museum (3.2 miles east). Green spaces nearby include Dundas Loch.

Map of Abercorn © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.