West Lothian · Scotland
Bath & shower resealing (mastic) in Broxburn, West Lothian
Bath resealing for Broxburn, without a refit. Send us photos for a fixed quote, then book a visit.
- Black spots in the silicone
- An untidy old seal
- Gaps by the taps
What bath resealing costs
We price every job individually. What matters most is:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Access to the area
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Details of any past repairs
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Bath resealing in Broxburn, done in place
We cut out all of the old sealant, deal with any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Common call-outs are for sealant that’s split or lifting and silicone smeared on tiles, on baths, wet rooms and shower trays & enclosures.
Big or small, it’s backed by a one-year guarantee.
- Area
- Broxburn (EH52)
- Area hub
- West Lothian
- Cover
- One year on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Broxburn
What else we do in Broxburn
For landlords and businesses
We work for landlords, letting agents and housing providers in Broxburn as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Common problems we fix in Broxburn
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
Common reasons people in Broxburn contact us are:
- Stained silicone
- Unsealed corners
- Sealant that is split or lifting
- A messy previous reseal
What to look for in a quote
- How soon you can use it again
- How long the guarantee is and what it covers
- How to care for the finish
- What happens if they find more damage
Where we work around Broxburn
Broxburn is about 3 miles north-east of Livingston, in West Lothian. We visit homes and businesses in Broxburn and nearby villages, so nothing has to leave your home. Broxburn is one of 58 towns and villages in West Lothian where we work. You can also see our page for Edinburgh, about 11 miles away.
Jobs in EH52 work the same way as everywhere else we cover. Whether you live on West Main Street, Station Road and East Main Street or a nearby road, we can come to you. Main roads around Broxburn include the A89 and A899, so getting to you is simple. Neighbouring places we cover include Winchburgh (2 miles north), Pumpherston (2 miles south), Auldcathie (2 miles north), West Clifton (2 miles south-east) and Calderwood (3 miles south-east). We also work in nearby towns such as Livingston (3 miles south-west), Bathgate (7 miles west), Linlithgow (6 miles north-west), Whitburn (9 miles south-west), East Calder (3 miles south) and Armadale (9 miles west). Broxburn is one of the larger places we cover in West Lothian.
What’s near Broxburn
We visit homes around Broxburn and Our Lady's High School, among other places. The nearest railway station is Uphall station, roughly 1.4 miles south-west. Nearby you will also find The Centre (3.8 miles south) and Broxburn Community Museum (under half a mile south-west). For a walk, there’s Dundas Loch and Dechmont Law.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take around two hours. We tidy up before we leave and tell you when it’s ready to use.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Different materials, different repairs
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Baths
We fill the bath before sealing, so the joint is at its widest.
Your questions about bath resealing in Broxburn
How long will it take?
Around two hours for a bath, plus curing time.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across West Lothian.
Keeping it looking good
It’s all simple stuff:
- Reseal when black spots will not clean off
- Store bottles on a shelf
- Use the extractor fan
- Wipe the joints dry after use
Leave the sealant to cure for the time we give you, normally about a day.
Black mould in sealant is not just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
Is resealing worth it?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. The price reflects the work involved, not your postcode. The full price is agreed before you book.
What you get with us
- Rooms protected and left tidy
- Free fixed quotes from pictures
- One visit for most repairs
- CHAS and Constructionline accredited
Take a look at our prices page.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
