West Sussex · England

Bath & shower resealing (mastic) in Albourne Street, West Sussex

Bath resealing in and around Albourne Street: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Damp near the bath
  • Silicone coming away from the tiles
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Albourne Street

Keeping it looking good

So the finish stays in good condition for years:

  • Clean the sealant gently and regularly
  • Run the extractor fan during and after showers
  • Reseal at the first sign of lifting
  • Keep the joints dry

Avoid scraping the joints, and keep shampoo bottles off the joints.

Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

About our bath resealing in Albourne Street

Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours, then it needs to cure. Whether it’s missing sealant behind the taps and an untidy old seal, we can generally put it right, whatever the material.

You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Location
Albourne Street (BN6)
County
West Sussex
Cover
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What we can’t put right

Some jobs aren’t right for a repair, including:

  • Gaps so wide they need filling or trims before sealing
  • Hidden water damage
  • A bath or tray that moves, until its support is fixed

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Basins & vanity units
  • Wet rooms
  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks

Prices and what affects them

We give every job a fixed price from pictures. This is what makes a difference:

  • Access to the area
  • Doing more than one item at once
  • The colour and finish to match
  • The material and finish

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed price

Most quotes are done from photos alone. To make it quick:

  • Something in shot to show the size
  • What it’s made of, if you know
  • Your postcode, so we can check dates
  • A picture taken from further back

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Questions from Albourne Street

Can I get a quote without a visit?

Nearly always. If photos do not show enough, we’ll ask for another angle.

Is there a call-out fee?

We do not add a call-out fee. Your fixed price includes everything.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you reseal over the old silicone?

We always remove the old sealant completely. Fresh silicone does not stick to old.

Will there be a smell?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Can you repair several things at once?

Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.

Resealing in Albourne Street: why it matters

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.

Why choose Surface Doctor in Albourne Street

  • One-year guarantee on every repair
  • Rooms protected and left tidy
  • Everything repaired in place
  • Free fixed quotes from pictures

See our prices page.

Covering Albourne Street

Albourne Street is about 4 miles south-west of Burgess Hill, in West Sussex. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Albourne Street is one of 371 places in West Sussex we cover. Our nearest city page is London, about 39 miles away.

Postcode districts we cover here: BN6. Whether you live on The Street and Leyfield or anywhere nearby, a technician can come to you. Other places close to Albourne Street include Albourne Green (1 mile north), Albourne (1 mile west), High Cross (1 mile north-west), Blackstone (1 mile west) and Twineham (2 miles north). Further out, we also cover Crawley (12 miles north), Horsham (10 miles north-west), Worthing (11 miles south-west), Haywards Heath (6 miles north-east), Burgess Hill (4 miles north-east) and Shoreham-by-Sea (7 miles south-west).

What’s near Albourne Street

Typical jobs here are in homes near The Parish Church of St Bartholomew, The White Horse Inn and Albourne CofE Primary School. The nearest railway station is Hassocks station, about 2.5 miles east of the centre. Well-known places in the area include The Dene Hospital (2.7 miles north-east) and The Budding Foundation Museum of Gardening (2.3 miles east). Open spaces near Albourne Street include Wolstonbury Hill and Woods Mill.

Map of Albourne Street © OpenStreetMap contributors

What happens on the day

Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow a couple of hours, and we’ll keep you posted as we go.

  1. First we strip out every bit of the old mastic.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access
  • Avoid using the area for a few hours before we arrive

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed quote

Related advice

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

When to call us in Albourne Street

Joints split if the bath or tray moves, often because it was sealed with the bath empty.

Contact us if you’ve noticed any of these:

  • Water getting behind the bath or tray
  • Old sealant that looks dirty
  • An untidy old seal
  • Silicone coming away from the tiles

Comparing quotes

  • The length of the guarantee and what it covers
  • How long it needs to cure
  • Who turns up on the day
  • A fixed price, and whether VAT is included

10 questions to ask before you book

Landlords, agents and businesses in Albourne Street

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.