Somerset · England

Bath Resealing for Aller homes

Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Aller. Free, fixed quotes from your photos.

  • Gaps by the taps
  • Black spots in the silicone
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Aller homes

Bath resealing in Aller, done in place

We cut out all of the old sealant, treat any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We are often asked to fix gaps in the seal and old sealant that looks dirty, across basins & vanity units, baths and wet rooms.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Technician in a mask working on a freestanding roll-top bath
Where
Aller (TA10)
Region
Somerset
Guarantee
A year, on every repair
Quotes
Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

When a repair isn’t the answer

A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:

  • Hollow or loose tiles
  • Movement in the bath or tray
  • Very wide gaps that need a trim

If in doubt, send pictures and we’ll say what we think before booking.

Materials we repair

  • Shower trays & enclosures
  • Wet rooms
  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units

The process

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a couple of hours. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Make sure the area is dry
  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access

Get a quote

Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Aller, and we will come back with a fixed quote.

Get a free quote

Advice

Resealing in Aller: why it matters

Resealing is routine maintenance. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why Aller customers choose us

  • Everything repaired in place
  • A year’s guarantee on all work
  • A fixed quote before you book
  • Normally one visit, start to finish

Read our prices page.

Repairs by material

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Common questions in Aller

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Do you work in Aller?

We do. Technicians travel to Aller from across the region, and the price is the same as everywhere else.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

When can I use the bath after resealing?

We will give you the curing time, normally around a day.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Is there a call-out fee?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.

Landlord and trade work in Aller

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We work for landlords, letting agents and housing providers in Aller as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Where we work around Aller

Aller is about 8 miles south-east of Bridgwater, in Somerset. From the centre of Aller to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 640 places across Somerset, from the larger towns to small villages.

We cover every part of the TA10 postcode area and the streets around it. Whether you live on High Street, Church View Close and Wood Lane or anywhere nearby, we can come to you. We also travel to Combe (1 mile south-east), Beer (1 mile north), Wearne (2 miles east), Othery (2 miles north-west) and Langport (2 miles south-east). Within a short drive, we also cover Taunton (11 miles west), Bridgwater (8 miles north-west), Yeovil (12 miles south-east), Chard (14 miles south), Burnham-on-Sea (14 miles north-west) and Wells (14 miles north-east).

Landmarks near Aller

Around Aller, we work in homes near Huish Episcopi Academy, Church of Saint Andrew and The Old Pound Inn, among other places. Other landmarks nearby include Willows and Wetlands Visitor Centre (3.6 miles west). Open spaces near Aller include West Sedgemoor RSPB reserve and Burrow Mump.

Map of Aller © OpenStreetMap contributors

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Reseal when black spots will not clean off
  • Wipe the joints dry after use
  • Clean the joints with a mild cleaner
  • Run the extractor fan during and after showers

Let it cure fully before using the bath or shower, normally about a day.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.

Common problems we fix in Aller

Poor ventilation speeds things up: damp hangs around, and mould takes hold.

These are the problems we’re asked about most:

  • Silicone coming away from the tiles
  • Black mould in the sealant
  • Damp near the bath
  • Stained silicone

What to look for in a quote

  • Whether the colour is mixed to match
  • Whether cleaning and preparation are in the price
  • When it can be used again
  • Who turns up on the day

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.