Somerset · England
Bath chip & crack repair in Aller, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Aller, with a one-year guarantee on every repair.
- Repairs from £95
- Scuffs and scratches in the surface
- Rust spots around the plughole
Bath repair in Aller, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. We regularly repair roll-top & freestanding, acrylic and pressed steel enamel, and people most often call us about damage beneath the taps and scratches you can feel with a fingernail.
Every repair is covered by a one-year guarantee.
- Area
- Aller (TA10)
- Area hub
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage. Before leaving, we tell you how long to leave it and how to look after it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
How to get a price
Upload pictures of the damage and one of the entire item, and tell us you are in Aller, and we will reply with a fixed price.
Read more
What we’re called out for in Aller
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Common reasons people in Aller contact us are:
- Chips along the edge of the bath
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
- Rusty patches near the plughole
What to look for in a quote
- Aftercare advice
- What prep work is covered
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Common questions in Aller
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens after I send photos?
We come back with a fixed price, plus dates. You are under no obligation.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Also in Aller
Landlord and trade work in Aller
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Why repair rather than replace?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Aller. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
- No need to remove anything
Take a look at our pricing or guide to resurfacing and replacement costs.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- A dripping tap stains enamel, so fix it early
- Clean with warm water and a mild detergent
- Keep metal cans and razors off the surface
- Ensure an acrylic bath is firm underfoot
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Aller and the surrounding area
Aller is about 8 miles south-east of Bridgwater, in Somerset. Across the TA10 area, we carry out the work at your property. Aller is one of 640 towns and villages in Somerset where we work.
We cover every part of TA10. Local streets include High Street, Church View Close and Wood Lane, all of which we cover. Neighbouring places we cover include Combe (1 mile south-east), Beer (1 mile north), Wearne (2 miles east), Othery (2 miles north-west) and Langport (2 miles south-east). Further out, we also cover Taunton (11 miles west), Bridgwater (8 miles north-west), Yeovil (12 miles south-east), Chard (14 miles south), Burnham-on-Sea (14 miles north-west) and Wells (14 miles north-east).
What’s near Aller
We visit homes around Huish Episcopi Academy, Church of Saint Andrew and The Old Pound Inn, among other places. A little further out are Willows and Wetlands Visitor Centre (3.6 miles west). For a walk, there’s West Sedgemoor RSPB reserve and Burrow Mump.
About our accreditations · Every repair comes with a one-year guarantee.
