East Riding of Yorkshire · England
Bath Resealing in Anlaby Common
Bath resealing in and around Anlaby Common: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Mould you cannot clean out
- Stained silicone
- Leaks at the edges
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Clean the joints with a mild cleaner
- Wipe the joints dry after use
- Keep bottles off the joints
- Ventilate the bathroom well
Leave the sealant to cure for the time we give you, usually around 24 hours.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
Bath resealing at your home in Anlaby Common
A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they keep water out. Typical jobs include sealant that’s split or lifting and damp near the bath, across wet rooms, kitchen worktops & sinks and baths.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Anlaby Common (HU4, HU5, HU10)
- County
- East Riding of Yorkshire
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Anlaby Common
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Anlaby Common as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What bath resealing costs
Prices are worked out job by job. What matters most is:
- Access to the area
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How hard the colour is to match
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
You can usually get a fixed quote without us visiting. To make it quick:
- A coin or ruler next to the damage for scale
- Natural light rather than flash
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say immediately whether it can be repaired.
How the visit works
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for about two hours for a bath from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- We apply fresh mould-resistant silicone and tool a neat bead.
Getting ready for the visit
- Let the surface dry out before the visit
- Let us know about parking or access
- Open a window if you can
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Other services in Anlaby Common
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
We fill the bath before sealing, to open the joint fully.
What we cannot put right
To be straight with you, some problems need a different fix:
- Water damage behind the bath that needs a builder
- Very wide gaps that need a trim
- Tiles that move, until they’re refixed
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
- Wet rooms
- Basins & vanity units
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
About Anlaby Common
Anlaby Common is about 2 miles north-east of Hessle, in East Riding of Yorkshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Anlaby Common is one of 299 places in East Riding of Yorkshire where we work. Our nearest city page is Leeds, about 47 miles away.
We cover every part of the HU4, HU5 and HU10 postcode area and the streets around it. Streets in the area include Hull Road, Orchard Road and Grimston Road, all of which we cover. Neighbouring places we cover include East Ella (1 mile east), Anlaby Park (1 mile south), Anlaby (1 mile west), Willerby (1 mile north-west) and Kirk Ella (2 miles west). Larger places within reach include Beverley (7 miles north), Hornsea (15 miles north-east), Market Weighton (13 miles north-west), Brough (6 miles west), Hedon (9 miles east) and South Cave (8 miles west).
What’s near Anlaby Common
Typical jobs here are in homes near Pickering Park, Acre Heads Primary School and The Highway pub, among other places. Nearby too are St. Mark (under half a mile south-west), Sirius Academy West (0.9 miles south) and The Educational Hearing Service for Hearing and Vision (1.3 miles south-east). Anlaby Common’s nearest station is Cottingham station, roughly 2.4 miles north. Nearby you will also find St Stephen's (2.8 miles east) and Hull and East Riding Hospital (1.1 miles south-west). Open spaces near Anlaby Common include Far Ings National Nature Reserve.
Anlaby Common questions
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you come to Anlaby Common?
Yes. We work across the UK and travel to Anlaby Common. Send us pictures for a fixed quote, or call 0345 017 0787.
How long does silicone take to cure?
We’ll give you the curing time, generally around a day.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
When to call us in Anlaby Common
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
The most common problems we are called about are:
- Damp near the bath
- Discoloured, yellow sealant
- Silicone smeared on tiles
- Gaps by the taps
What to look for in a quote
- How changes to the job are handled
- What protection goes down before work starts
- Whether the colour is mixed to match
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
