Argyll and Bute · Scotland
Bath & shower resealing (mastic) in Arinagour, Argyll and Bute
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Arinagour and across Argyll and Bute. Free, fixed quotes from your pictures.
- An untidy old seal
- Unsealed corners
- Sealant that’s split or lifting
What we’re called out for in Arinagour
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
It’s worth getting a quote if you see:
- Silicone smeared on tiles
- Old sealant that looks dirty
- Leaks at the edges
- Sealant that’s split or lifting
Comparing quotes
- When it can be used again
- How the colour is matched
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
About our bath resealing in Arinagour
We reseal baths, shower trays, basins and worktops. Most jobs take a couple of hours. Common call-outs are for discoloured, yellow sealant and leaks at the edges, in shower trays & enclosures, wet rooms and basins & vanity units.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Where
- Arinagour (PA78)
- County
- Argyll and Bute
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Is resealing worth it?
A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- Fixed prices from your photos
- Repair technicians who travel to you, UK-wide
- No need to remove anything
- Honest advice, even when it means no job
Read our prices page.
Covering Arinagour
Arinagour is in Argyll and Bute. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 118 towns and villages across Argyll and Bute, from the larger towns to small villages.
Postcode districts we cover here: PA78. Local streets include Main Street, Carnan Road and Shore Street, and we cover them all. Neighbouring places we cover include Scarinish (13 miles south-west), Ballygown (15 miles south-east), Crossapol (16 miles south-west), Kilchoan (17 miles east) and Tobermory (17 miles east). For island and remote addresses, call first so we can plan the visit.
Landmarks near Arinagour
In Arinagour, that means homes near Coll Parish Church (Church Of Scotland), among other places. Well-known places in the area include Old Breachacha Castle (4.4 miles south-west). Open spaces near Arinagour include Loch Airidh Meall Bhreide.
Questions from Arinagour
How long before I can shower?
Normally about a day later. We confirm before we leave.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Do you cover Arinagour?
We do. Repair technicians travel to Arinagour from across the region, and the price is the same as everywhere else.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.
What a repair can’t fix
Some jobs are not right for a repair, including:
- Tiles that move, until they’re refixed
- Water damage behind the bath that needs a builder
- Gaps so wide they need filling or trims before sealing
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, for the same reason.
Baths
Baths are resealed with water in them, so the joint is at its widest.
Landlords, agents and businesses in Arinagour
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
What else we do in Arinagour
What bath resealing costs
We give every job a fixed quote from pictures. This is what makes a difference:
- Access to the area
- What the surface is made of
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Any details about the material
For a price in Arinagour, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
How the visit works
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It typically takes around two hours, and you’re welcome to carry on with your day while we work.
- All the old sealant is cut out and removed.
- The joint is cleaned and any mould treated.
- We dry the joint thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
How to prepare
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
