Staffordshire · England
Bath & shower resealing (mastic) in Ashmore Brook, Staffordshire
Bath resealing in Ashmore Brook without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Missing sealant behind the taps
- Silicone smeared on tiles
- Old sealant that looks dirty
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Bath resealing in Ashmore Brook without replacing anything
The key to a good reseal is getting all of the old silicone out. New silicone will not bond to old, which is why so many DIY reseals peel. Typical jobs include stained silicone and black mould in the sealant, in baths, wet rooms and kitchen worktops & sinks.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Location
- Ashmore Brook (WS13)
- Area hub
- Staffordshire
- Guarantee
- A year, on every repair
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath resealing in Ashmore Brook?
Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.
Common reasons people in Ashmore Brook contact us include:
- Stained silicone
- Mould you can’t clean out
- Silicone coming away from the tiles
- Water getting behind the bath or tray
Questions to ask before booking
- What happens if they find more damage
- Whether the price covers travel
- What the guarantee covers, and for how long
- Aftercare advice
Prices and what affects them
You will know the full cost before you book. We look at:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. You will get a fixed quote, not an estimate.
Where we work around Ashmore Brook
Ashmore Brook is about 2 miles north-west of Lichfield, in Staffordshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 512 towns and villages across Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 16 miles away.
We work across the WS13 postcode area and the streets around it. We also travel to Creswell Green (1 mile west), Leomansley (2 miles east), Woodhouses (2 miles south-west), Chorley (2 miles west) and Darwin Park (2 miles south-east). Larger places within reach include Stafford (13 miles north-west), Burton upon Trent (12 miles north-east), Tamworth (9 miles south-east), Cannock (6 miles west), Rugeley (5 miles north-west) and Burntwood (3 miles south-west).
Landmarks near Ashmore Brook
Around Ashmore Brook, we work in homes near Beacon Park, The Friary School and Chadsmead Primary Academy, among other places. Nearby too are Church of St Bartholomew (0.9 miles north-west) and The Friary School (0.6 miles east). For rail, the closest station is Lichfield City station, roughly 1.8 miles south-east of the centre. Other landmarks nearby include Cannock Castle Ring (3.4 miles west) and Letocetum Roman Baths And Museum (2.8 miles south). Open spaces near Ashmore Brook include Minster Pool and George's Hayes.
Places near Ashmore Brook
Other services in Ashmore Brook
Ashmore Brook: your questions answered
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
How long does a reseal take?
Around two hours for a bath, then it needs to cure.
Do you cover the entire of Staffordshire?
We work UK-wide. Prices don’t change with location.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How do I get a price for bath resealing in Ashmore Brook?
Because every job differs, we price from photos. You know the full cost before anything is booked.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Is resealing worth it?
Resealing is a small job. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. The price reflects the work involved, not where you live. You’ll see the full price before booking, with no extras added later.
Why choose Surface Doctor in Ashmore Brook
- No extra charge for your area
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page.
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Gaps so wide they need filling or trims before sealing
- Hidden water damage
- Tiles that move, until they’re refixed
If in doubt, send photos and we’ll say what we think.
What we work on
- Baths
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
Keeping it looking good
How the surface is treated afterwards matters:
- Run the extractor fan during and after showers
- Reseal at the first sign of lifting
- Dry the seal after bathing
- Clean the joints with a mild cleaner
Do not scrape the sealant with anything sharp, and do not stand bottles on the seal.
Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes about two hours for a bath. At the end we talk you through how soon it can be used and how to look after it.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Get a quote
Most clients in Ashmore Brook get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
