North Lincolnshire · England

Bath & shower resealing (mastic) in Auckley, North Lincolnshire

We travel to Auckley for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Unsealed corners
  • Leaks at the edges
  • Mould you can’t clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Auckley

About our bath resealing in Auckley

Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. If you are dealing with silicone smeared on tiles and mould you can’t clean out, we can help, on kitchen worktops & sinks, basins & vanity units and shower trays & enclosures alike.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Roll-top bath being refinished by a Surface Doctor technician
Where
Auckley (DN9)
Area hub
North Lincolnshire
Cover
One year on every repair
Quote
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Auckley: your questions answered

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you quote from pictures?

Typically, yes. Clear photos let us give you a fixed price without visiting.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

How long does a reseal take?

Most reseals take about two hours. It then needs time to cure.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

The process

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow about two hours for a bath. Before we go, we will explain how long to leave it and what to avoid for the first few days.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. Any mould is treated and the joint dried.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Clear the area around the damage
  • Tell us about any previous repairs or coatings

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a fixed quote

Related advice

When to call us in Auckley

In time, even good sealant discolours. Steam, soap and movement all take their toll.

It’s worth getting a quote if you see:

  • Black mould in the sealant
  • A messy previous reseal
  • Gaps by the taps
  • Silicone coming away from the tiles

Before you book anyone

  • Whether they match the colour on site
  • Is the price fixed, and does it include VAT?
  • Whether the price covers travel
  • Whether cleaning and preparation are in the price

10 questions to ask before booking

Where we work around Auckley

Auckley is about 4 miles east of Doncaster, in North Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Our repair technicians cover 90 places across North Lincolnshire. We work right across the region, from Auckley to Leeds (about 30 miles away).

Every address in DN9 is within our area, from the main roads to the quietest streets. From Main Street, Ellers Lane and Maple Drive or a nearby road, we can come to you. If you are just outside Auckley, we cover Branton (1 mile north-west), Old Cantley (2 miles north-west), Cantley (2 miles west), Bessacarr (3 miles west) and Armthorpe (3 miles north-west). Within a short drive, we also cover Bottesford (15 miles east), Epworth (8 miles east), Yaddlethorpe (15 miles east), Crowle (10 miles north-east), Messingham (15 miles east) and Westwoodside (6 miles east).

What’s near Auckley

We visit homes around Eagle and Child pub, The Hayfield School and Church of St Saviour. Nearby too are The Hayfield School (0.7 miles south) and Auckley School (under half a mile south). For rail, the closest station is Kirk Sandall station, about 4.8 miles north-west of the centre. Other landmarks nearby include Doncaster Royal Infirmary (4.2 miles north-west). Green spaces nearby include Potteric Carr Nature Reserve.

Map of Auckley © OpenStreetMap contributors

When a repair is not the answer

A repair is not always the answer, and we’d rather say so up front. Repairs will not solve:

  • Hollow or loose tiles
  • Very wide gaps that need a trim
  • Hidden water damage

Send us pictures and we’ll tell you honestly.

Materials we work on in Auckley

  • Baths
  • Basins & vanity units
  • Kitchen worktops & sinks
  • Wet rooms
  • Shower trays & enclosures

What your bath or shower is made of matters

Baths

We fill the bath before sealing, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.

What affects the price in Auckley

There is no charge for travel to Auckley. The price comes down to:

  • Unusual colours or finishes
  • Access to the area
  • Whether old repairs or coatings need taking off
  • The material

Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • What it’s made of, if you know
  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • One picture of the whole bath or shower

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

How to look after the repair

Once the work has cured, treat it gently:

  • Keep bottles off the joints
  • Open a window after bathing
  • Replace the seal when mould sets in
  • Ventilate the bathroom well

Leave the sealant to cure for the time we give you, typically around 24 hours.

Mouldy sealant is more than a cosmetic problem, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.

For landlords and businesses

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.