Doncaster · England

Bath & shower resealing (mastic) in Cantley, Doncaster

Bath resealing in Cantley without the cost of replacing. Send us photos for a fixed quote, then book a visit.

  • Mould you can’t clean out
  • Old sealant that looks dirty
  • A messy previous reseal
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Cantley

Is resealing worth it?

Resealing costs very little and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Dust sheets down, tidy finish
  • A year’s guarantee on all work
  • Normally one visit, start to finish
  • Straight answers about what a repair can do

See our prices page.

Bath resealing in Cantley without replacing anything

The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. We regularly repair basins & vanity units, wet rooms and kitchen worktops & sinks, and the jobs we see most are damp near the bath and gaps by the taps.

You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.

Area
Cantley (DN4, DN3)
Region
Doncaster
Cover
12 months on all our work
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What your bath or shower is made of matters

Baths

Baths are resealed with water in them, to open the joint fully.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Our work in Cantley

Cantley is about 2 miles south of Armthorpe, in Doncaster. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 89 towns and villages in Doncaster. You can also see our page for Leeds, about 29 miles away.

We cover every part of DN4 and DN3. That includes homes on Birch Road, Green Lane and Acacia Road and the roads around them. Neighbouring places we cover include Old Cantley (1 mile north-east), Bessacarr (1 mile west), Branton (1 mile east), Auckley (2 miles east) and Armthorpe (2 miles north). We also work in nearby towns such as Adwick le Street (7 miles north-west), Thorne (8 miles north-east), Conisbrough (7 miles west), Bentley (4 miles north-west), New Rossington (3 miles south) and Intake (3 miles west).

Local landmarks in Cantley

Our clients here include homes close to Church of St Wilfrid, Hawthorn Primary School and St Bernard's Catholic High School. The closest station to Cantley is Doncaster station, about 3.4 miles west of the centre. Further afield, we also cover the area around Doncaster Royal Infirmary (2.5 miles north-west) and Danum Gallery (2.9 miles west). Open spaces near Cantley include Potteric Carr Nature Reserve.

Map of Cantley © OpenStreetMap contributors

What we do, step by step

Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes about two hours for a bath, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Before we arrive

  • Open a window if you can
  • Clear the area around the damage
  • Tell us if there are stairs or a lift

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower, we can give you a fixed price.

Get a fixed quote

Advice

How to care for the repair

So the finish stays in good condition for years:

  • Ventilate the bathroom well
  • Store bottles on a shelf
  • Let steam out after showers
  • Dry the seal after bathing

Leave the sealant to cure for the time we give you, typically around 24 hours.

Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.

When we’d advise against a repair

We’ll always be straight with you, so here’s what a repair can’t fix:

  • Very wide gaps that need a trim
  • Water damage behind the bath that needs a builder
  • Loose tiles, which need refixing first

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Baths
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Wet rooms

Common questions in Cantley

How long does silicone take to cure?

We’ll give you the curing time, generally around a day.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Do you seal over the old sealant?

Never over old. It’s removed, cleaned off and the joint dried first.

Are there extra charges for Cantley?

We do not add a call-out fee. The fixed quote covers the visit and the work.

Can I get a quote without a visit?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Common problems we fix in Cantley

A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.

It’s worth getting a quote if you see:

  • An untidy old seal
  • Damp near the bath
  • Black mould in the sealant
  • Gaps in the seal

What to look for in a quote

  • If travel is included in the price
  • What aftercare is recommended
  • Is the price fixed, and does it include VAT?
  • How changes to the job are handled

How to compare quotes

What bath resealing costs

There’s no charge for travel to Cantley. The price comes down to:

  • How many items we do on one visit
  • How many areas need work
  • Any earlier repairs that need removing first
  • The material and finish

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Quotes from your pictures

Good photos mean an accurate price. Here’s what we find most useful:

  • A picture taken from further back
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size
  • The postcode, so we can plan the visit

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.