Perth and Kinross · Scotland
Bath & shower resealing (mastic) in Bankfoot, Perth and Kinross
Local bath resealing for Bankfoot: photo quotes, tidy work and a year’s guarantee.
- Discoloured, yellow sealant
- Silicone coming away from the tiles
- Leaks at the edges
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Gaps so wide they need filling or trims before sealing
- A bath or tray that moves, until its support is fixed
- Loose tiles, which need refixing first
Send us pictures and we’ll tell you honestly.
Materials we work on in Bankfoot
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Basins & vanity units
About our bath resealing in Bankfoot
A reseal is a small job that makes a big difference. Fresh joints make the entire room look cleaner, and they protect the walls and floor. Our technicians work on shower trays & enclosures, kitchen worktops & sinks and baths, and people most often call us about missing sealant behind the taps and an untidy old seal.
All our work is covered by a one-year guarantee, wherever you are in Perth and Kinross.
- Where
- Bankfoot (PH1)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Bankfoot
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
For anyone letting property in or around Bankfoot, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.
How to care for the repair
Nothing complicated is needed:
- Replace the seal when mould sets in
- Use the extractor fan
- Give the seal a regular clean
- Air the room after use
Let it cure fully before using the bath or shower, normally about a day.
Damp below or loose tiles need checking quickly. There may be more going on, so we’ll tell you if it needs a builder or plumber.
What else we do in Bankfoot
Bankfoot questions
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
How do I stop mould in sealant?
Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Which areas do you work in?
All of Perth and Kinross, and the rest of the UK. There is no extra charge for travel.
When to call us in Bankfoot
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning can’t get it all out.
Look out for any of the following:
- Old sealant that looks dirty
- Damp near the bath
- Unsealed corners
- Sealant that’s split or lifting
Comparing quotes
- When it can be used again
- Whether cleaning and preparation are in the price
- Who will actually do the work
- How to look after the finish
Prices and what affects them
There are no hourly rates or hidden extras. The price is based on:
- The type of damage
- Any earlier repairs that need removing first
- How hard the colour is to match
- Access to the area
We charge the same wherever you are, with no extra for Bankfoot. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Two or three clear pictures are generally enough. It helps if you send:
- Good light, ideally daylight, without flash glare
- Any details about the material
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
Most clients in Bankfoot get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take about two hours for a bath. We tidy up before we leave and tell you when it’s ready to use.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
How to prepare
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Ask for a price
For a price in Bankfoot, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Why reseal now?
Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, which costs far more to put right. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why us?
- One price list for the whole UK
- Rooms protected and left tidy
- One-year guarantee on every repair
- CHAS and Constructionline accredited
See our full price list.
Bankfoot and the surrounding area
Bankfoot is about 7 miles north of Perth, in Perth and Kinross. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover 107 places in Perth and Kinross, from the larger towns to small villages. We work right across the region, from Bankfoot to Edinburgh (40 miles away).
Our visits in PH1 work the same way as everywhere else we cover. Whether you live on Main Street, Graham Court and Church Lane or a nearby road, we can come to you. We also travel to West Tofts (3 miles east), Stanley (3 miles south-east), Murthly (3 miles north-east), Gellyburn (3 miles north-east) and Middleton (3 miles north). Larger places within reach include Perth (7 miles south), Blairgowrie and Rattray (9 miles north-east), Crieff (15 miles south-west), Letham (7 miles south), Scone (7 miles south-east) and Tulloch (6 miles south).
What’s near Bankfoot
In Bankfoot, that means homes near Auchtergaven Parish Church. Bankfoot’s nearest station is Dunkeld & Birnam station, about 4.5 miles north-west. Well-known places in the area include Murthly Castle (2.8 miles north). The countryside around Bankfoot includes Lily Loch and Birnam Hill.
About our accreditations · Every repair comes with a one-year guarantee.
