Perth and Kinross · Scotland

Bath Resealing for Perth homes

Local bath resealing for Perth: photo quotes, tidy work and a year’s guarantee.

  • Unsealed corners
  • Silicone coming away from the tiles
  • An untidy old seal
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Perth

Your questions about bath resealing in Perth

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

Do you cover Perth?

We do. Technicians travel to Perth from across the region, with no extra charge for travel.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

How long does resealing take?

Usually a couple of hours, then it needs to cure.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How do I stop mould in sealant?

Generally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.

Can you price it without visiting?

In nearly every case. If pictures do not show enough, we will ask for another angle.

About our bath resealing in Perth

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Whether it’s sealant that’s split or lifting and stained silicone, we can typically put it right.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.

Roll-top bath being refinished by a Surface Doctor technician
Where
Perth (PH1, PH2)
Region
Perth and Kinross
Guarantee
One year on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

How to care for the repair

So the finish stays in good condition:

  • Keep bottles off the joints
  • Use the extractor fan
  • Wipe the joints dry after use
  • Open a window after bathing

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

What we’re called out for in Perth

Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.

Customers usually contact us about:

  • Damp near the bath
  • Discoloured, yellow sealant
  • Unsealed corners
  • Black mould in the sealant

What your quote should include

  • The length of the guarantee and what it covers
  • Whether they match the colour on site
  • What preparation is included
  • Whether the price covers travel

How to compare quotes

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

Why it’s worth resealing in Perth

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Why us?

  • Fixed prices from your photos
  • Most jobs done in one visit
  • Every repair guaranteed for a year
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our full price list.

What affects the price in Perth

We charge the same across the UK, including Perth. What changes the price is:

  • The size and number of damaged areas
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off

Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Getting a price from photos

Good pictures mean an accurate price. Here’s what we find most useful:

  • What it’s made of, if you know
  • One sharp close-up of the damage
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

How the visit works

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a couple of hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Ensure the area is dry
  • Move bottles, mats and clutter away from the area

Get a quote

To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Send photos for a quote

Advice

Materials and what they mean for the repair

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

Baths are resealed with water in them, to open the joint fully.

Our work in Perth

Perth is about 33 miles north of Edinburgh, in Perth and Kinross. From the centre of Perth to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 107 places in Perth and Kinross. We work right across the region, from Perth to Edinburgh (about 33 miles away).

Postcode districts we cover here: PH1 and PH2. Streets in the area include Simpson Square, High Street and Moredun Square, all of which we cover. Main roads around Perth include the A9 and A85, so getting to you is simple. If you’re just outside Perth, we cover Oakbank (1 mile south-west), Scoonieburn (2 miles south-east), Tarsappie (2 miles south-east), Milltown of Aberdalgie (3 miles south-west) and Forgandenny (4 miles south). We also work in nearby towns such as Blairgowrie and Rattray (14 miles north), Crieff (15 miles west), Auchterarder (12 miles south-west), Kinross (13 miles south), Coupar Angus (12 miles north-east) and Rattray (14 miles north). Perth is among the bigger towns we cover in Perth and Kinross.

Near you in Perth

Our clients here include homes close to Milne Street, St John's Academy and Perth High School. Other local landmarks include Public House (0.6 miles east) and North Inch (0.8 miles east). The nearest railway station is Perth station, about 0.7 miles south-east of the centre. Further afield, we also cover the area around Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). For a walk, there’s St Magdalene's Hill.

Map of Perth © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.