Leicestershire · England

Bath Resealing for Barkby Thorpe homes

Bath, shower and sink resealing with new mould-resistant silicone at your home in Barkby Thorpe, with a one-year guarantee on every repair.

  • Black spots in the silicone
  • A messy previous reseal
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Barkby Thorpe

Barkby Thorpe and the surrounding area

Barkby Thorpe is about 1 mile south of Syston, in Leicestershire. Across the LE7 area, we come to you. We work in all 287 towns and villages in Leicestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 38 miles away.

Jobs in LE7 are booked in the same way as anywhere else. Jobs here include addresses on King Street and Barkbythorpe Road and the roads around them. Other places close to Barkby Thorpe include Barkby (1 mile north-east), Thurmaston (1 mile west), Syston (1 mile north), Beeby (2 miles east) and Humberstone (2 miles south). We also work in nearby towns such as Loughborough (9 miles north-west), Wigston (7 miles south), Melton Mowbray (10 miles north-east), Coalville (13 miles west), Shepshed (12 miles north-west) and Shelthorpe (9 miles north-west).

What’s near Barkby Thorpe

We visit homes around The Brookside pub, The Roundhill Academy and The Pochin School. You’ll also find St Mary's Church (0.5 miles north) and Appleton Park (1.9 miles south-west). The closest station to Barkby Thorpe is Syston station, roughly 1.5 miles north-west of the centre. Further afield, we also cover the area around Charnwood (2.3 miles south-west) and Mountsorrel Castle (4.9 miles north-west).

Map of Barkby Thorpe © OpenStreetMap contributors

Bath resealing in Barkby Thorpe, done in place

We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, then it needs to cure. Our repair technicians work on wet rooms, shower trays & enclosures and kitchen worktops & sinks, and people most frequently call us about leaks at the edges and mould you can’t clean out.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.

Where
Barkby Thorpe (LE7)
Area hub
Leicestershire
Guarantee
One year on every repair
Price
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

We fill the bath before sealing, so the joint is at its widest.

What we can’t put right

We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • Movement in the bath or tray
  • Loose tiles, which need refixing first
  • Rotten walls or floors behind the bath

Send us photos and we’ll tell you honestly.

What we work on

  • Baths
  • Basins & vanity units
  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Wet rooms

Landlord and trade work in Barkby Thorpe

We regularly work with letting and managing agents. Send the address, pictures and access details.

We work for landlords, letting agents and housing providers in Barkby Thorpe as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

What happens on the day

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take around two hours. We clean up when we are done and let you know when you can use it again.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Getting ready for the visit

  • Have a window or extractor fan available
  • Point us to the nearest place to park
  • Clear the area around the damage

Ask for a price

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.

Get a free quote

Advice

How to look after the repair

To keep it looking its best:

  • Clean the sealant gently and regularly
  • Open a window after bathing
  • Keep bottles off the joints
  • Use the extractor fan

Run the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Black mould in sealant isn’t just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

Barkby Thorpe questions

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Why does my sealant keep going mouldy?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

When can I use the bath after resealing?

Generally after around 24 hours. We confirm before we leave.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

Do you seal over the old sealant?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What we’re called out for in Barkby Thorpe

Most reseals are because of black mould. It grows into the sealant itself, so cleaning only removes the surface.

Look out for these signs:

  • Damp near the bath
  • A messy previous reseal
  • Old sealant that looks dirty
  • Mould you cannot clean out

What to look for in a quote

  • How the colour is matched
  • What prep work is covered
  • Who will actually do the work
  • What aftercare is recommended

10 questions to ask before booking

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

What affects the price in Barkby Thorpe

There’s no charge for travel to Barkby Thorpe. The price depends on:

  • The size and number of damaged areas
  • The material
  • Access to the area
  • Whether we combine several jobs

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Getting a price from pictures

The better the photos, the more accurate the price. Here’s what helps:

  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale
  • Daylight if possible, and no flash reflection
  • Where you are, by postcode

Email us a photo of the damage and a wider shot of the whole item, and tell us you are in Barkby Thorpe, and we will reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.