Cheshire West and Chester · England
Bath & shower resealing (mastic) in Barton, Cheshire West and Chester
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Barton. Free, fixed quotes from your pictures.
- Gaps by the taps
- Sealant that’s split or lifting
- Damp near the bath
About Barton
Barton is about 7 miles east of Wrexham, in Cheshire West and Chester. Our technicians come to customers in Barton, so you don’t need to take anything anywhere. Barton is one of 224 places in Cheshire West and Chester where we work. You can also see our page for Liverpool, about 23 miles away.
Every address in SY14 is within our area, from the main roads to the quietest streets. We also cover the places around Barton: Stretton (1 mile south), Coddington (1 mile north), Crewe-by-Farndon (2 miles west), Tilston (2 miles south) and Farndon (2 miles west). Further out, we also cover Chester (8 miles north), Ellesmere Port (14 miles north), Winsford (14 miles north-east), Boughton (8 miles north), Frodsham (15 miles north) and Hoole (8 miles north).
Near you in Barton
Our customers here include homes close to St Mary's Church, Clutton Church of England Primary School and Cock of Barton Inn. Nearby you will also find Holt Castle (2.4 miles west) and Museum of Amusements (3.6 miles north-east). Green spaces nearby include Bickerton Hill.
Bath resealing in Barton, done in place
A proper reseal starts with removing every trace of the old silicone. Fresh sealant does not stick to old, which is why many DIY jobs peel. Whether it’s stained silicone and leaks at the edges, we can usually put it right, on wet rooms, shower trays & enclosures and kitchen worktops & sinks alike.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Barton (SY14)
- County
- Cheshire West and Chester
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Barton
Also in Barton
What we are called out for in Barton
Sealant does not last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.
These are the problems we are asked about most:
- Water getting behind the bath or tray
- Sealant that is split or lifting
- Discoloured, yellow sealant
- Unsealed corners
Questions to ask before booking
- How to care for the finish
- How changes to the job are handled
- How your room will be protected
- What the guarantee covers, and for how long
Prices and what affects them
We give every job a fixed quote from pictures. This is what makes a difference:
- The colour and finish to match
- What the surface is made of
- How much damage there is
- Access to the area
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
You can generally get a fixed price without us visiting. To help us price it:
- Something in shot to show the size
- A clear, close picture of the problem area
- Where you are, by postcode
- Whether it’s been repaired or coated before
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Common questions in Barton
How long will it take?
A bath or shower typically takes a couple of hours. Leave it to cure before use.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Do you come to Barton?
Yes. We cover the whole UK and come to Barton and the rest of Cheshire West and Chester. Send photos and we’ll quote, or call 0345 017 0787.
What happens next?
We review the pictures and send a fixed quote.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Why it’s worth resealing in Barton
Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.
What you get with us
- Work done at your home or business
- Nothing taken out or refitted
- A year’s guarantee on all work
- Fixed prices from your pictures
Take a look at our pricing.
How it works
We work cleanly and quietly. We protect the area first, then the work takes about two hours for a bath. Before we leave, we explain how soon it can be used and how to look after it.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Work for landlords and builders
We work for landlords, letting agents and housing providers in Barton as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
We fill the bath before sealing, so the joint is at its widest.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
When we would advise against a repair
We will always be straight with you, so here’s what a repair cannot fix:
- Hidden water damage
- Gaps too big for silicone alone
- Hollow or loose tiles
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & vanity units
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
About our accreditations · Every repair comes with a one-year guarantee.
