Cheshire West and Chester · England

Bath Resealing for Crewe-by-Farndon homes

Bath resealing in Crewe-by-Farndon without the cost of replacing. Send us photos for a fixed price, then book a visit.

  • Water getting behind the bath or tray
  • Silicone smeared on tiles
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Crewe-by-Farndon

When to call us in Crewe-by-Farndon

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.

If you can see any of these, send us a photo:

  • Gaps in the seal
  • Unsealed corners
  • Black mould in the sealant
  • Stained silicone

What to look for in a quote

  • Whether the colour is mixed to match
  • Who turns up on the day
  • When it can be used again
  • Whether there are any call-out or travel charges

Our hiring checklist

Bath resealing in Crewe-by-Farndon, done in place

Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. If you’re dealing with gaps by the taps and sealant that’s split or lifting, we can generally put it right.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Where
Crewe-by-Farndon (CH3)
Area hub
Cheshire West and Chester
Warranty
A year, on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

What happens on the day

You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes around two hours, and you’re welcome to carry on with your day while we work.

  1. We cut out all of the old sealant.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Tell us about any previous repairs or coatings
  • Open a window if you can
  • Let us know about parking or access

Get a quote

The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.

Get a free quote

Advice

Crewe-by-Farndon questions

Why does my sealant keep splitting?

Typically because the bath or tray moves. We fill the bath before sealing it.

How long will it take?

Around two hours for a bath, plus curing time.

Is there a guarantee?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Can you reseal over the old silicone?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

How long does silicone take to cure?

Usually after around 24 hours. We will tell you the exact time.

Where we work around Crewe-by-Farndon

Crewe-by-Farndon is about 5 miles east of Wrexham, in Cheshire West and Chester. From the centre of Crewe-by-Farndon to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 224 towns and villages in Cheshire West and Chester, from the larger towns to small villages. We work right across the region, from Crewe-by-Farndon to Liverpool (about 23 miles away).

Every address in CH3 is within our area. Neighbouring places we cover include Holt (1 mile west), Farndon (1 mile north-west), Stretton (2 miles east), Barton (2 miles east) and Coddington (2 miles north-east). Further out, we also cover Chester (8 miles north), Ellesmere Port (14 miles north), Boughton (8 miles north), Hoole (9 miles north), Whitby (14 miles north) and Newtown (9 miles north).

What’s near Crewe-by-Farndon

We visit homes around Hand & Heart Hotel, St Chad's Church and Holt's Community Primary School and the streets around them. Other landmarks nearby include Holt Castle (0.7 miles north-west) and Trevalyn Manor (3.9 miles north-west). Not far away are Bickerton Hill and Pant-yr-ochain Big Pool.

Map of Crewe-by-Farndon © OpenStreetMap contributors

What affects the price in Crewe-by-Farndon

We price every job individually. What matters most is:

  • The material
  • Access to the area
  • How hard the colour is to match
  • Previous DIY repairs that have to come out

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Getting a price from photos

Most quotes are done from photos alone. To make it quick:

  • Your postcode, so we can check dates
  • What it’s made of, if you know
  • A photo taken from further back
  • Natural light rather than flash

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

How to look after the repair

To keep it looking its best:

  • Keep bottles off the joints
  • Reseal at the first sign of lifting
  • Clean the joints with a mild cleaner
  • Wipe the joints dry after use

Don’t scrape the sealant with anything sharp, and don’t stand bottles on the seal.

Reseal before water gets in. Gaps or lifting edges mean it needs doing.

Work for landlords and builders

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Repairs by material

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Baths

We fill the bath before sealing, so the joint is at its widest.

What a repair can’t fix

A repair is not right for every job, including:

  • Hollow or loose tiles
  • Rotten walls or floors behind the bath
  • Movement in the bath or tray

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we repair

  • Shower trays & enclosures
  • Baths
  • Basins & vanity units
  • Wet rooms
  • Kitchen worktops & sinks

Resealing in Crewe-by-Farndon: why it matters

Resealing is a small job. Putting off a reseal can let water reach the walls and floor, which costs far more to put right. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why Crewe-by-Farndon customers choose us

  • Fixed prices from your pictures
  • Typically one visit, start to finish
  • Every repair guaranteed for a year
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.