Gloucestershire · England

Bath Resealing for Barton End homes

Bath resealing across Barton End and nearby, done in a single visit in most cases.

  • Old sealant that looks dirty
  • Gaps in the seal
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Barton End?

What a repair can’t fix

Some jobs are not right for a repair, for example:

  • Rotten walls or floors behind the bath
  • Movement in the bath or tray
  • Gaps so wide they need filling or trims before sealing

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Barton End

  • Wet rooms
  • Kitchen worktops & sinks
  • Basins & vanity units
  • Shower trays & enclosures
  • Baths

Bath resealing at your home in Barton End

The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. Whether it’s discoloured, yellow sealant and leaks at the edges, we can typically put it right, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Roll-top bath being refinished by a Surface Doctor technician
Where
Barton End (GL6)
Region
Gloucestershire
Warranty
A year, on every repair
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Common problems we fix in Barton End

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

Get in touch if you’ve noticed any of these:

  • Leaks at the edges
  • Black spots in the silicone
  • Discoloured, yellow sealant
  • Sealant that is split or lifting

Questions to ask before booking

  • What aftercare is recommended
  • Who will actually do the work
  • What the guarantee covers, and for how long
  • How soon you can use it again

Choosing a repair company

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Give the seal a regular clean
  • Keep the joints dry
  • Do not stand toiletries on the seal
  • Reseal at the first sign of lifting

Leave the sealant to cure for the time we give you, usually around 24 hours.

Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.

Questions from Barton End

Can you repair something that is been repaired before?

In most cases. We remove the old repair before doing a new one, so mention it when you send photos.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, access to the room.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

Why does mould come back so fast?

Normally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

Is there any odour?

Expect a mild smell while we are working, which fades afterwards.

Do you work in Barton End?

Yes, we do. We send a technician to Barton End for every job, with no extra charge for travel.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.

When can you do it?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

Why reseal now?

Resealing is a small job. Leaving split or mouldy sealant can let water reach the walls and floor, which costs far more to put right. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • A fixed quote before booking
  • No extra charge for your area
  • CHAS and Constructionline accredited
  • Dust sheets down, tidy finish

Read our full price list.

Our work in Barton End

Barton End is about 4 miles south of Stroud, in Gloucestershire. Across the GL6 area, a technician comes to you. Our repair technicians cover 470 places across Gloucestershire. Our jobs stretch from Barton End to Birmingham (about 56 miles away).

All of GL6 is covered, from the main roads to the quietest streets. Jobs here include addresses on Bath Road, Shipton's Grave Lane and Bartonend Lane and the roads around them. Close by, we cover Tiltups End (1 mile south), Horsley (1 mile west), Nailsworth (1 mile north), Newmarket (1 mile north-west) and Kingscote (2 miles south-west). We also work in nearby towns such as Gloucester (12 miles north), Stroud (4 miles north), Cirencester (11 miles east), Brockworth (12 miles north), Quedgeley (10 miles north) and Lydney (13 miles west).

Around Barton End

In Barton End, that means homes near Church of St Martin and Horsley Church of England Primary School. The closest station to Barton End is Stroud station, roughly 4.4 miles north. A little further out are Dunkirk Mill Museum (1.6 miles north) and Beverston Castle (2.4 miles south). For a walk, there’s Coaley Peak and Woodchester Park.

Map of Barton End © OpenStreetMap contributors

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

How it works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a couple of hours. We tidy up before we leave and tell you when it’s ready to use.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Keep a parking space free if you can
  • Let us know if it has been repaired before

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

Get a fixed price

Advice

Work for landlords and builders

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Landlords, letting agents and housing providers in Barton End use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

What affects the price in Barton End

There are no hourly rates or hidden extras. The price is based on:

  • Whether we combine several jobs
  • How many areas need work
  • Where the damage is and how we get to it
  • The colour and finish to match

The price reflects the work involved, not your postcode. You will see the full price before you book.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • Where you are, by postcode
  • A coin beside the damage so we can judge size
  • The material, if you know it
  • Details of any past repairs

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.