Hampshire · England
Bath & shower resealing (mastic) in Beech, Hampshire
Our technicians come to Beech for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Stained silicone
- Missing sealant behind the taps
- Damp near the bath
What affects the price in Beech
We charge the same across the UK, including Beech. What changes the price is:
- How many areas need work
- Any earlier repairs that need removing first
- The colour and finish to match
- The type of damage
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
You can usually get a fixed price without us visiting. To make it quick:
- Details of any past repairs
- A coin beside the damage so we can judge size
- A picture taken from further back
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Bath resealing at your home in Beech
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. Typical jobs include leaks at the edges and an untidy old seal, in basins & vanity units, shower trays & enclosures and baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Beech (GU34)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
How it works
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It generally takes about two hours for a bath, and you can get on with other things while we’re there.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- For a bath, we fill it with water first so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Before we arrive
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Getting a price
Most clients in Beech get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Beech questions
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How much does bath resealing cost in Beech?
We give a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
Do you cover the entire of Hampshire?
We work UK-wide. Our prices are the same everywhere.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Why does my sealant keep splitting?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your photos and we’ll quote them together.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Give the seal a regular clean
- Reseal at the first sign of lifting
- Keep bottles off the joints
- Let steam out after showers
Keep the room well ventilated, and wipe the joints after use so mould struggles to take hold.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we’ll say if you need a builder or plumber.
When we’d advise against a repair
A repair isn’t right for every job, for example:
- Movement in the bath or tray
- Loose tiles, which need refixing first
- Gaps so wide they need filling or trims before sealing
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Baths
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
Do you need bath resealing in Beech?
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
People generally call us when they notice one of these:
- Silicone coming away from the tiles
- An untidy old seal
- Damp near the bath
- Missing sealant behind the taps
Questions to ask before booking
- Aftercare advice
- How the room is protected while they work
- Whether the price covers travel
- The length of the guarantee and what it covers
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What else we do in Beech
Our work in Beech
Beech is about 2 miles west of Alton, in Hampshire. Customers in Beech get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. You can also see our page for London, about 47 miles away.
Postcode districts we cover here: GU34. Whether you live on Wellhouse Road, Medstead Road and King's Hill or anywhere nearby, a technician can come to you. Neighbouring places we cover include Thedden (1 mile north-west), Wivelrod (1 mile west), Bentworth (2 miles north-west), Holt End (2 miles west) and New Copse (2 miles west). Larger places within reach include Basingstoke (9 miles north-west), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (13 miles north-east) and Petersfield (10 miles south).
Local landmarks in Beech
In Beech, that means homes near St Peter's and Amery Hill School and the streets around them. Beech’s nearest station is Alton station, about 2.2 miles east of the centre. Well-known places in the area include Barton Castle (4.3 miles west) and Alton Community Hospital (1.2 miles east). For a walk, there is King's Hill.
About our accreditations · Every repair comes with a one-year guarantee.
